C13-XQ350 Rental Generator Set Caterpillar


Plate Locations and Film Locations

Usage:

C13 XQ350 X3M

Generator Set Identification



Illustration 1g03146438
(1) Location of the identification plate for the generator set

The generator set consists of the generator and the engine. The location of the identification plate for the generator set is shown in illustration 1.

Serial Number Plate



Illustration 2g01185411
Right Side View of Engine Only
(2) Location of serial number plate

The Engine Serial Number Plate contains the following information:

  • Engine serial number ____________________

  • Engine model number ____________________

  • Arrangement number ____________________

Engine Information Plate



Illustration 3g03146479
(3) Location of the engine information plate

The Engine Information Plate contains the following information:

  • Engine serial number ____________________

  • Arrangement number ____________________

  • Compression ratio ____________________

  • Aftercooler temperature ____________________

  • Power ____________________

  • Full load RPM ____________________

Generator Identification Plate



Illustration 4g03146516
Location of the generator identification plate

The generator identification is located on the side of the generator.

The generator identification film includes the following information:

  • Serial number for the generator ____________________

  • Generator model number ____________________

Caterpillar Information System:

CX48-P2300 Petroleum Transmission Power Train Electronic Control System Sensor Signal (PWM) - Test
C280-16 Petroleum Engine Housing (Front)
C27 and C32 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
2012/09/13 A New O-Ring for the Oil Filler Cap Is Used on C175-16 Engines {1107, 7555}
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Intake Manifold Air Pressure Is Low
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Sensor Signal (Analog, Active) - Test
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Crankcase Pressure Is High
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Oil Filter Differential Pressure Problem
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Oil Pressure Is Low
C280 Marine and Petroleum Engines Exhaust Temperature Is Low
C280 Marine and Petroleum Engines Exhaust Temperature Is High
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Coolant Pressure Is Low
C18 Marine Auxiliary and Marine Generator Set Engines Engine Has Mechanical Noise (Knock)
Health Interface Module Configuration and Operation Guide for Certain Trucks Equipped with a Non-Cat Tire Monitoring System {7605} Health Interface Module Configuration and Operation Guide for Certain Trucks Equipped with a Non-Cat Tire Monitoring System {7605}
C18 Marine Auxiliary and Marine Generator Set Engines Engine Misfires, Runs Rough or Is Unstable
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Oil Level Is Low
C13-XQ350 Rental Generator Set Product Lifting
C280 Marine and Petroleum Engines Prelubrication Pump Problem
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Connector Contact Description
C32 Marine Engines Fuel System Pressure - Test
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Cooling Fan Control - Test
C32 Marine Engines Engine Oil Pressure - Test
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Determining Diagnostic Trouble Codes
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.