Jacket Water Heater
Show/hide table
图 1 | g02103813 |
Show/hide table
330-1823 水套水加热器总成 和 330-1822 水套水加热器总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 4     | 9M-5048 锁紧螺母     | 将每个锁紧螺母交替拧紧至 40 ± 4 N·m (30 ± 3 lb ft)。 确保尺寸 (A) 处的压缩间距相等。     |
芯是水套水加热器的维护修理零件,其技术规格如下: 1. 电压为 220 VAC。 2. 功率为 9 KW。     |
|||
节温器预设为 48.9 °C (120 °F) 标准节温器范围为 32 至 54 °C (90 至 130 °F)     |
Caterpillar Information System:
C175-16 Petroleum Engines Fuel Injection Pump
C18 Generator Set Plate Locations and Film Locations
C15 and C18 Engines for Caterpillar Built Machines Boost Pressure Sensor - Remove and Install
EMCP4.1/EMCP4.2 Output Programming
349F and 352F Excavators Camera Harness - Disconnect and Connect
2010/06/25 A New Water Connection Gp Is Used on C32 Engines that Are Keel Cooled {1380}
C15 and C18 Industrial Engines Engine Control Module - Remove and Install
C27 Generator Set Engines Vibration Damper and Pulley
C13 Engine for Combat and Tactical Vehicles Main Bearing Journal
C9.3 Tier 4 Interim Engines Speed Control (PTO) - Test
C4.4 Industrial Engine Engine Operation
CX35-P800 Petroleum Transmission Maintenance Interval Schedule
2010/02/19 A New Tool is Available to Test and Adjust the Setting of the Main Relief Valve and the Line Relief Valves for Certain Excavators {0784, 5051, 5069, 5117}
C18 Generator Set Generator Start-up Checklist
3508C, 3512C and 3516C Marine Engines Heat Exchanger - Disassemble
C18 Generator Set Generator Bearing - Lubricate
C15 and C18 Industrial Engines Fuel Temperature Sensor - Remove and Install
C18 Generator Set Product Installation
C15 and C18 Industrial Engines Fuel Pressure Sensor - Remove and Install
C15 and C18 Industrial Engines Coolant Temperature Sensor - Remove and Install
3508C, 3512C and 3516C Marine Engines Heat Exchanger - Assemble
3508C, 3512C and 3516C Marine Engines Heat Exchanger - Assemble
C15 and C18 Engines Product Description
EMCP4.1/EMCP4.2 Analog Input Programming