2010/06/25 Caterpillar


A New Water Connection Gp Is Used on C32 Engines that Are Keel Cooled {1380}

Usage:

C32 RND
Generator Set:
C32 (S/N: RNE1-UP; RNX1-UP)
Marine Engine:
C32 (S/N: RND1-UP; RNY1-UP)

Description of Change: The new water connection gp includes new brackets for improved support of the connection gp. Also, a new optional flexible connection gp is available.

Adaptable To:

Note: Refer to Assembly and Installation Guide, LEBW4978, "Cooling Systems" for the instructions that are used in order to support the ships piping.




Illustration 1g02105773

View from right-hand side of the engine

(1) 344-1139 Water Connection Gp

The new 344-1139 Water Connection Gp is used in order to replace the existing 294-0549 Water Connection Gp, and the 294-0550 Water Connection Gp. These water connection groups are serviced from the right-hand side of the engine.

Note: Installing the new 344-1139 Water Connection Gp requires some reconfiguration of the ships piping.




Illustration 2g02105775

View from left-hand side of the engine

(2) 344-1140 Water Connection Gp

The new 344-1140 Water Connection Gp is used in order to replace the existing 294-0548 Water Connection Gp, and the 294-0551 Water Connection Gp. These water connection groups are serviced from the left-hand side of the engine.

Note: Installing the new 344-1140 Water Connection Gp requires some reconfiguration of the ships piping.These changes are effective on the serial numbers that are listed in Table 1.

Table 1
Effective Serial Numbers    
S/N:RNX305-UP    
S/N:RNY844-UP    
The new 346-6567 Water Connection Gp is available as an option. The 346-6567 Water Connection Gp provides a flexible connection from the expansion tank to a 4 inch flange for the connection to the ships piping.

Note: The new 346-6567 Water Connection Gp can only be used with the 344-1139 Water Connection Gp and the 344-1140 Water Connection Gp .Refer to Illustration 3 for a view of the 346-6567 Water Connection Gp.




Illustration 3g02105868

346-6567 Water Connection Gp

(3) 355-7002 Flexible Connection

(4) 6V-8188 Nut

(5) 7X-0325 Bolt

(6) 8T-4223 Hard Washer

Refer to Table 2 for a list of the parts that are included in the 346-6567 Water Connection Gp.

Table 2
346-6567 Water Connection Gp    
Part Number     Description     Quantity    
355-7002     Flexible Connection     2    
6V-8188     Nut     16    
7X-0325     Bolt     16    
8T-4223     Hard Washer     32    
Refer to Illustration 4 and Illustration 5 for the dimensions of the two water connection groups.

Note:




Illustration 4g02125742

(A) 419 mm (16.5 inch)

(B) 588 mm (23 inch)




Illustration 5g02126015

(C) 1411.1 mm (55.5 inch)

(D) 1396.1 mm (55 inch)

(E) 552.5 mm (21.75 inch)

(F) 792.5 mm (31 inch)

(7) Centerline of the crankshaft

(8) Rear of the engine

Note: The dimensions that are located above are valid for both the 344-1139 Water Connection Gp and the 344-1140 Water Connection Gp.

Caterpillar Information System:

C15 and C18 Industrial Engines Engine Control Module - Remove and Install
C27 Generator Set Engines Vibration Damper and Pulley
C13 Engine for Combat and Tactical Vehicles Main Bearing Journal
C9.3 Tier 4 Interim Engines Speed Control (PTO) - Test
C4.4 Industrial Engine Engine Operation
CX35-P800 Petroleum Transmission Maintenance Interval Schedule
CB22B, CB24B, CB32B and CC24B Utility Compactors Film (Product Identification) - Clean
3512C Petroleum Engines Fuel Filter Differential Pressure - Check
Conversion Procedure for Frequency on the C32 Power Module{1901, 4490, 7002} Conversion Procedure for Frequency on the C32 Power Module{1901, 4490, 7002}
G3306B Generator Sets Crankcase Blowby - Test/Record
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Varistor - Inspect
G3500 Generator Sets Space Heater - Test
349F and 352F Excavators Camera Harness - Disconnect and Connect
EMCP4.1/EMCP4.2 Output Programming
C15 and C18 Engines for Caterpillar Built Machines Boost Pressure Sensor - Remove and Install
C18 Generator Set Plate Locations and Film Locations
C175-16 Petroleum Engines Fuel Injection Pump
G3516C and G3516E Gas Engines Jacket Water Heater
2010/02/19 A New Tool is Available to Test and Adjust the Setting of the Main Relief Valve and the Line Relief Valves for Certain Excavators {0784, 5051, 5069, 5117}
C18 Generator Set Generator Start-up Checklist
3508C, 3512C and 3516C Marine Engines Heat Exchanger - Disassemble
C18 Generator Set Generator Bearing - Lubricate
C15 and C18 Industrial Engines Fuel Temperature Sensor - Remove and Install
C18 Generator Set Product Installation
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.