Valve Mechanism
Show/hide table
图 1 | g02975877 |
Show/hide table
326-1959 气门机构总成 技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
-     | -     | -     | 气门间隙尺寸: 进气门为 0.38 ± 0.08 mm (0.015 ± 0.003 in)。 排气门为 0.76 ± 0.08 mm (0.030 ± 0.003 in)。     |
1     | -     | 2Y-5829 螺母     | 拧紧至扭矩为 30 ± 7 N·m (266 ± 62 lb in)。 拧紧螺母后,重新检查气门间隙设置。     |
Caterpillar Information System:
793F Off-Highway Truck Engine Supplement Water Pump (Engine) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
C13 Tier 4 Final Engines Rocker Shaft
C15 and C18 Industrial Engines Camshaft Gear - Remove and Install
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Install
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Remove
C7.1 Industrial Engine and Generator Set Throttle Setup
793F Off-Highway Truck Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
C175-16 and C175-20 Generator Set Engines Fuel System Operation
793F Off-Highway Truck Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
C7.1 Industrial Engine Gauges and Indicators
797F and 797F XQ Off-Highway Truck Hydraulic System Truck Body Mounting
797F and 797F XQ Off-Highway Truck Braking System Gear Motor (Rear Axle Lubrication)
797F and 797F XQ Off-Highway Truck Steering System Bypass Switch (Hydraulic Fan, Steering Oil Filter)
C7.1 Industrial Engine and Generator Set Multiposition Switch Setup
G3304B and G3306B Engines Housing (Front) - Remove
G3304B and G3306B Engines Housing (Front) - Install
Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239} Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239}
C9.3 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
14L Motor Grader Water Pump - Remove and Install
G3304B and G3306B Engines Gear Group (Front) - Remove
C7.1 Industrial Engine and Generator Set Mode Switch Setup
797F and 797F XQ Off-Highway Truck Power Train Planetary Case and Parts Group - Front Module
G3304B and G3306B Engines Gear Group (Front) - Install