793F Off-Highway Truck Engine Supplement Caterpillar

Removal Procedure

Show/hide table

Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin. Be sure that the engine and components are cool enough to touch with your bare hand prior to performing any service work.

1. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
   Show/hide table

   Illustration 1	g02127011

   Show/hide table

   Illustration 2	g02127019

2. Remove cover (1) in order to remove oil filter element (2). Repeat this step for the remaining oil filter and base.
   Show/hide table

   Illustration 3	g02127025

3. Disconnect harness assembly (3). Disconnect hose assembly (4). Remove clip (5) and position the tube assembly out of the way.

4. Disconnect tube assemblies (6). Remove clamps (7).
   Show/hide table

   Illustration 4	g02127044

5. Attach Tooling (A) and a suitable lifting device onto oil filter and base (8). The weight of oil filter and base (8) is approximately 73 kg (160 lb).

6. Remove bolts (9). Remove oil filter and base (8).

Installation Procedure

1. Install engine oil filter and base (8) in the reverse order of removal.