C13 Tier 4 Final Engines Caterpillar


Rocker Shaft

Usage:

730C2 2T4


Illustration 1g02550858

Table 1
Specification for 224-4419 Shaft 
Item  Qty  Part  Specification Description 
3S-6605 Cup Plug  Installation depth (A) is 1.00 ± 0.25 mm (0.04 ± 0.010 inch)
Maximum amount of taper across length of diameter is 0.007 mm (0.0003 inch)
Diameter of the rocker arm shaft is 34.000 ± 0.010 mm (1.3386 ± 0.0004 inch)

Caterpillar Information System:

C15 and C18 Industrial Engines Camshaft Gear - Remove and Install
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Install
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Remove
C7.1 Industrial Engine and Generator Set Throttle Setup
793F Off-Highway Truck Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
C175-16 and C175-20 Generator Set Engines Fuel System Operation
793F Off-Highway Truck Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
C7.1 Industrial Engine Gauges and Indicators
797F and 797F XQ Off-Highway Truck Hydraulic System Truck Body Mounting
C13 Engines for Caterpillar Built Machines Electronic Unit Injector Rocker Arm
793F Off-Highway Truck Machine Systems Seat - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Install
C9.3 Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
793F Off-Highway Truck Engine Supplement Water Pump (Engine) - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
797F and 797F XQ Off-Highway Truck Braking System Gear Motor (Rear Axle Lubrication)
797F and 797F XQ Off-Highway Truck Steering System Bypass Switch (Hydraulic Fan, Steering Oil Filter)
C7.1 Industrial Engine and Generator Set Multiposition Switch Setup
G3304B and G3306B Engines Housing (Front) - Remove
G3304B and G3306B Engines Housing (Front) - Install
Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239} Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239}
C9.3 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
14L Motor Grader Water Pump - Remove and Install
G3304B and G3306B Engines Gear Group (Front) - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.