Crankshaft Rear Seal and Wear Sleeve - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
D     | 9S-8871     | 密封定位器     | 1     |
9S-8858 | 螺母     | 1     | |
9S-8890 | 螺栓     | 3     | |
5P-7298 | 安装工具     | 1     | |
E     | 169-5464     | 快速硫化底漆     | -     |
F     | 4C-9507     | 挡圈固定胶     | -     |
- 使用工具 (D) 按照下列步骤安装曲轴后密封和承磨衬套。
- 将密封定位工具在曲轴上放置到位并安装将密封定位工具固定在位的三个螺栓。
Show/hide table图 1 g01952573
- 将清洁的发动机机油涂覆在曲轴后密封的唇部和承磨衬套的外径上。
- 将曲轴后密封安装在承磨衬套有伞齿轮的一侧。 确保曲轴后密封的唇部朝向发动机内部。 承磨衬套有伞齿轮的一侧应当朝向发动机外侧。
- 使用工具 (E) 清洁曲轴法兰的外径和承磨衬套的内径。
- 将工具 (F) 涂覆在曲轴法兰的外径和承磨衬套的内径上。
注: 确保密封的唇形部位朝向发动机内部。 承磨衬套的外径应当朝向发动机外侧。
- 将承磨衬套 (2) 和曲轴后密封 (1) 放置在定位器上。 将安装工具放置在定位器上,安装螺母。 在垫圈表面和螺母上涂抹润滑剂。
- 拧紧螺母,直到安装工具接触到定位器。
- 拆下工具 (D) 并检查承磨衬套和曲轴后密封安装是否正确。
End By: 安装飞轮。
Caterpillar Information System:
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Remove
C7.1 Industrial Engine and Generator Set Throttle Setup
793F Off-Highway Truck Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
C175-16 and C175-20 Generator Set Engines Fuel System Operation
793F Off-Highway Truck Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
C7.1 Industrial Engine Gauges and Indicators
797F and 797F XQ Off-Highway Truck Hydraulic System Truck Body Mounting
C13 Engines for Caterpillar Built Machines Electronic Unit Injector Rocker Arm
793F Off-Highway Truck Machine Systems Seat - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Install
C15 and C18 Industrial Engines Inlet and Exhaust Valves - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Remove
C15 and C18 Industrial Engines Camshaft Gear - Remove and Install
C13 Tier 4 Final Engines Rocker Shaft
C9.3 Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
793F Off-Highway Truck Engine Supplement Water Pump (Engine) - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
797F and 797F XQ Off-Highway Truck Braking System Gear Motor (Rear Axle Lubrication)
797F and 797F XQ Off-Highway Truck Steering System Bypass Switch (Hydraulic Fan, Steering Oil Filter)
C7.1 Industrial Engine and Generator Set Multiposition Switch Setup
G3304B and G3306B Engines Housing (Front) - Remove
G3304B and G3306B Engines Housing (Front) - Install
Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239} Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239}
C9.3 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install