Inlet and Exhaust Valves - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 5S-1330     | 气门弹簧压缩器     | 1     |
B     | 8S-2263     | 弹簧测试仪     | 1     |
开始:
- 拆卸缸盖。 请参阅拆解和组装, "缸盖 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 安装工具 (A) 并压缩气门弹簧。 将气门弹簧卡座 (2) 从气门 (1) 上拆下。
Show/hide table
图 1 | g01015263 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 将工具 (A) 从气门 (1) 上缓慢拆下。
- 拆下气门旋转器 (3) 。
- 将外气门弹簧 (5) 和内气门弹簧 (4) 从气门 (1) 上拆下。
- 将垫圈 (6) 和气门 (1) 从气门导管上拆下。
- 用工具 (B) 检查一下气门弹簧(弹力)。 关于气门弹簧的更多信息,请参考技术规格, "缸盖气门"。
- 检查每个气门。 关于进气和排气气门的更多信息,请参考技术规格, "缸盖气门"。
安装步骤
- 按相反顺序安装进气和排气门。
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
Show/hide table
当松开气门弹簧压缩器的时候,气门弹簧卡座会从气门中弹出。 保证气门弹簧卡座正确安装在气门推杆上。 为了防止造成人员伤害,在安装气门时,应远离气门弹簧卡座前方和气门弹簧。 |
End By: 安装缸盖。 请参阅 拆解和组装, "缸盖- 安装"。
Caterpillar Information System:
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Remove
C15 and C18 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
G3304B and G3306B Engines Water Directors - Remove and Install
C9.3 Marine Propulsion Engine Decommissioning and Disposal
C13 Tier 4 Final Engines Electronic Unit Injector Mechanism
G3304B and G3306B Engines Flywheel Housing - Install
C13, C15, and C18 Tier 4 Interim Engines ARD Is Disabled
797F and 797F XQ Off-Highway Truck Power Train Transmission Hydraulic Control
C175-16 Locomotive Engine Engine Governing - Adjust
G3304B and G3306B Engines Flywheel Housing - Remove
G3512E and G3520E Generator Set Engines Electronic Control System Parameters
G3304B and G3306B Engines Flywheel - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Install
793F Off-Highway Truck Machine Systems Seat - Remove and Install
C13 Engines for Caterpillar Built Machines Electronic Unit Injector Rocker Arm
797F and 797F XQ Off-Highway Truck Hydraulic System Truck Body Mounting
C7.1 Industrial Engine Gauges and Indicators
793F Off-Highway Truck Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
C175-16 and C175-20 Generator Set Engines Fuel System Operation
793F Off-Highway Truck Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
C7.1 Industrial Engine and Generator Set Throttle Setup
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Remove
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Install
C15 and C18 Industrial Engines Camshaft Gear - Remove and Install