Flywheel Housing - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | FT-0120     | 提升支架     | 1     |
B     | -     | 导向螺柱 1/2 - 13 x 6 in     |
2     |
C     | 5H-2471     | 粘接剂     | -     |
- 清除缸体和飞轮壳体表面上的旧密封垫。 将工具 (B) 安装到缸体中。 安装一个新的密封垫。
- 将工具 (A) 和适当的起吊设备连接到飞轮壳体 (6) 上。 飞轮壳体 (6) 的重量约为 55 kg (120 lb)。
Show/hide table
图 1 | g01951848 |
- 将飞轮壳体 (6) 在工具 (B) 上放置到位。
注: 当您安装飞轮壳体时请小心谨慎。 您可能会损坏密封垫。
- 安装螺栓 (5) 。 拆下工具 (B) 。 安装其余的螺栓 (5) 和螺栓 (7) 。 拆下工具 (A) 。
- 按照飞轮壳体和缸体底面均匀切割密封垫。 将工具 (C) 涂抹在密封垫与发动机油底壳密封垫接触的的面积上。
- 将一薄层清洁的发动机机油涂抹在管组件 (4) 的 O 形密封圈上。 安装管组件 (4) 。
Show/hide table
图 2 | g01951847 |
- 将空气滤清器 (2) 放置到位。 安装螺栓 (3) 并拧紧软管卡箍 (1) 。
End By:
- 安装曲轴后密封和承磨衬套。
- 安装起动马达。
Caterpillar Information System:
C13, C15, and C18 Tier 4 Interim Engines ARD Is Disabled
797F and 797F XQ Off-Highway Truck Power Train Transmission Hydraulic Control
C175-16 Locomotive Engine Engine Governing - Adjust
G3304B and G3306B Engines Flywheel Housing - Remove
G3512E and G3520E Generator Set Engines Electronic Control System Parameters
G3304B and G3306B Engines Flywheel - Remove and Install
C13 Industrial Engines Electronic Unit Injector
C175 Generator Sets Generator Operation
2010/10/08 Proper Placement of the Speed Control for Some Gas Engines {1264, 1716, 1908}
2009/08/17 A New Hose Assembly for the Coolant Outlet from the Turbocharger Is Used on Some 3508B and 3512B Engines {1355, 1380, 1393}
C7.1 Industrial Engine and Generator Set Injector Code - Calibrate
797F and 797F XQ Off-Highway Truck Power Train Differential
C13 Tier 4 Final Engines Electronic Unit Injector Mechanism
C9.3 Marine Propulsion Engine Decommissioning and Disposal
G3304B and G3306B Engines Water Directors - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Remove
C15 and C18 Industrial Engines Inlet and Exhaust Valves - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Install
793F Off-Highway Truck Machine Systems Seat - Remove and Install
C13 Engines for Caterpillar Built Machines Electronic Unit Injector Rocker Arm
797F and 797F XQ Off-Highway Truck Hydraulic System Truck Body Mounting
C7.1 Industrial Engine Gauges and Indicators
793F Off-Highway Truck Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install