Electronic Unit Injector
Show/hide table
Illustration 1 | g01951584 |
(1) Bolt torque ...
(2) Lubricate the seals and the bore with a 50 percent mix of 8T-2998 Lubricant and engine oil.
Caterpillar Information System:
C175 Generator Sets Generator Operation
2010/10/08 Proper Placement of the Speed Control for Some Gas Engines {1264, 1716, 1908}
2009/08/17 A New Hose Assembly for the Coolant Outlet from the Turbocharger Is Used on Some 3508B and 3512B Engines {1355, 1380, 1393}
C7.1 Industrial Engine and Generator Set Injector Code - Calibrate
797F and 797F XQ Off-Highway Truck Power Train Differential
797F and 797F XQ Off-Highway Truck Steering System Solenoid Valve (Steering)
797F and 797F XQ Off-Highway Truck Steering System Solenoid and Relief Valve (Steering)
C7.1 Industrial Engine and Generator Set Diesel Particulate Filter Collects Excessive Soot
797F and 797F XQ Off-Highway Truck Power Train Relief Valve (Transmission Main)
797 Off-Highway Truck Braking System Service and Parking Brake (Rear)
797F and 797F XQ Off-Highway Truck Power Train Torque Converter Housing
G3512E and G3520E Generator Set Engines Air/Fuel Ratio Control
G3304B and G3306B Engines Flywheel - Remove and Install
G3512E and G3520E Generator Set Engines Electronic Control System Parameters
G3304B and G3306B Engines Flywheel Housing - Remove
C175-16 Locomotive Engine Engine Governing - Adjust
797F and 797F XQ Off-Highway Truck Power Train Transmission Hydraulic Control
C13, C15, and C18 Tier 4 Interim Engines ARD Is Disabled
G3304B and G3306B Engines Flywheel Housing - Install
C13 Tier 4 Final Engines Electronic Unit Injector Mechanism
C9.3 Marine Propulsion Engine Decommissioning and Disposal
G3304B and G3306B Engines Water Directors - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Remove