Crankshaft Front Seal and Wear Sleeve - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 1U-7600     | 滑锤拉拔器总成     | 1     |
B     | 5P-7312     | 密封拆卸器     | 1     |
C     | 5P-7315     | 拆卸器环     | 1     |
开始:
- 拆下减振器和皮带轮。
注: 当您更换前密封时,务必更换承磨衬套。
- 使用工具 (A) 拆下曲轴前密封 (1) 。
Show/hide table
图 1 | g00988251 |
典型实例 |
- 将工具 (C) 安装在密封孔中。
Show/hide table
图 2 | g00988254 |
- 将工具 (B) 安装到工具 (C) 与承磨衬套之间。
- 转动工具 (B) 直到工具边缘在承磨衬套中形成了一个平的区域(折痕)。 在两个或更多位置进行这一步骤,直到承磨衬套松开。
- 用手拆下工具 (C) 和承磨衬套。
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
G3304B and G3306B Engines Water Directors - Remove and Install
C9.3 Marine Propulsion Engine Decommissioning and Disposal
C13 Tier 4 Final Engines Electronic Unit Injector Mechanism
G3304B and G3306B Engines Flywheel Housing - Install
C13, C15, and C18 Tier 4 Interim Engines ARD Is Disabled
797F and 797F XQ Off-Highway Truck Power Train Transmission Hydraulic Control
C175-16 Locomotive Engine Engine Governing - Adjust
G3304B and G3306B Engines Flywheel Housing - Remove
G3512E and G3520E Generator Set Engines Electronic Control System Parameters
G3304B and G3306B Engines Flywheel - Remove and Install
C13 Industrial Engines Electronic Unit Injector
C15 and C18 Industrial Engines Inlet and Exhaust Valves - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Install
793F Off-Highway Truck Machine Systems Seat - Remove and Install
C13 Engines for Caterpillar Built Machines Electronic Unit Injector Rocker Arm
797F and 797F XQ Off-Highway Truck Hydraulic System Truck Body Mounting
C7.1 Industrial Engine Gauges and Indicators
793F Off-Highway Truck Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
C175-16 and C175-20 Generator Set Engines Fuel System Operation
793F Off-Highway Truck Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
C7.1 Industrial Engine and Generator Set Throttle Setup
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Remove
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Install