Transmission Hydraulic Control
Show/hide table
Illustration 1 | g01962104 |
Top view |
(1) Torque for nine hose assemblies ...
(2) Lubricate the O-ring seals lightly with the lubricant that is being sealed.
(3) Torque for two drain adapters ...
Caterpillar Information System:
C175-16 Locomotive Engine Engine Governing - Adjust
G3304B and G3306B Engines Flywheel Housing - Remove
G3512E and G3520E Generator Set Engines Electronic Control System Parameters
G3304B and G3306B Engines Flywheel - Remove and Install
C13 Industrial Engines Electronic Unit Injector
C175 Generator Sets Generator Operation
2010/10/08 Proper Placement of the Speed Control for Some Gas Engines {1264, 1716, 1908}
2009/08/17 A New Hose Assembly for the Coolant Outlet from the Turbocharger Is Used on Some 3508B and 3512B Engines {1355, 1380, 1393}
C7.1 Industrial Engine and Generator Set Injector Code - Calibrate
797F and 797F XQ Off-Highway Truck Power Train Differential
797F and 797F XQ Off-Highway Truck Steering System Solenoid Valve (Steering)
797F and 797F XQ Off-Highway Truck Steering System Solenoid and Relief Valve (Steering)
C13, C15, and C18 Tier 4 Interim Engines ARD Is Disabled
G3304B and G3306B Engines Flywheel Housing - Install
C13 Tier 4 Final Engines Electronic Unit Injector Mechanism
C9.3 Marine Propulsion Engine Decommissioning and Disposal
G3304B and G3306B Engines Water Directors - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Remove
C15 and C18 Industrial Engines Inlet and Exhaust Valves - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Install
793F Off-Highway Truck Machine Systems Seat - Remove and Install
C13 Engines for Caterpillar Built Machines Electronic Unit Injector Rocker Arm
797F and 797F XQ Off-Highway Truck Hydraulic System Truck Body Mounting