Truck Body Mounting
Show/hide table
| |
| Illustration 1 | g01952319 |
| (2) Pad assembly | |
Note: Refer to the Hydraulic System Systems Operation/Testing and Adjusting, "Pad Assembly (Dump Body) - Install and Adjust" for the proper installation of the pad assemblies (2).
Note: Install as many plates (3) as necessary in order to center the truck body on the chassis. Locate the plates on the body pivot pin between the frame rails for the truck body and the outside surface of the frame rails for the chassis. Do not install plates (3) on the inboard side of the frame rails for the chassis.
(1) Thickness of shim ...
(3) Thickness of plate ...
Caterpillar Information System:
C13 Engines for Caterpillar Built Machines Electronic Unit Injector Rocker Arm
793F Off-Highway Truck Machine Systems Seat - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Install
C15 and C18 Industrial Engines Inlet and Exhaust Valves - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Remove
C15 and C18 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
G3304B and G3306B Engines Water Directors - Remove and Install
C9.3 Marine Propulsion Engine Decommissioning and Disposal
C13 Tier 4 Final Engines Electronic Unit Injector Mechanism
G3304B and G3306B Engines Flywheel Housing - Install
C13, C15, and C18 Tier 4 Interim Engines ARD Is Disabled
797F and 797F XQ Off-Highway Truck Power Train Transmission Hydraulic Control
C7.1 Industrial Engine Gauges and Indicators
793F Off-Highway Truck Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
C175-16 and C175-20 Generator Set Engines Fuel System Operation
793F Off-Highway Truck Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
C7.1 Industrial Engine and Generator Set Throttle Setup
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Remove
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Install
C15 and C18 Industrial Engines Camshaft Gear - Remove and Install
C13 Tier 4 Final Engines Rocker Shaft
C9.3 Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
793F Off-Highway Truck Engine Supplement Water Pump (Engine) - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism