Crankshaft Rear Seal and Wear Sleeve - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1U-7600 | 滑锤拉拔器总成 | 1 |
| B | 5P-7312 | 密封拆卸器 | 1 |
| C | 5P-7313 | 拆卸器环 | 1 |
开始:
- 拆下飞轮。
- 使用工具 (A) 拆下曲轴后密封 (1) 。
Show/hide table
 | |
| 图 1 | g01002496 |
- 将工具 (C) 安装在后密封孔中。
Show/hide table
 | |
| 图 2 | g01952387 |
- 将工具 (B) 安装到工具 (C) 与承磨衬套之间。 转动工具 (B) 直到工具末端在承磨衬套中形成了一个平整的地方（折痕）。
- 在两个或更多位置进行这一步骤，直到承磨衬套松开。
- 用手拆下工具 (C) 和承磨衬套 (1) 。
Caterpillar Information System:
C7.1 Industrial Engine and Generator Set Throttle Setup
793F Off-Highway Truck Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
C175-16 and C175-20 Generator Set Engines Fuel System Operation
793F Off-Highway Truck Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
C7.1 Industrial Engine Gauges and Indicators
797F and 797F XQ Off-Highway Truck Hydraulic System Truck Body Mounting
C13 Engines for Caterpillar Built Machines Electronic Unit Injector Rocker Arm
793F Off-Highway Truck Machine Systems Seat - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Install
C15 and C18 Industrial Engines Inlet and Exhaust Valves - Remove and Install
G3304B and G3306B Engines Crankshaft Front Seal and Wear Sleeve - Remove
C15 and C18 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Install
C15 and C18 Industrial Engines Camshaft Gear - Remove and Install
C13 Tier 4 Final Engines Rocker Shaft
C9.3 Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
793F Off-Highway Truck Engine Supplement Water Pump (Engine) - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
797F and 797F XQ Off-Highway Truck Braking System Gear Motor (Rear Axle Lubrication)
797F and 797F XQ Off-Highway Truck Steering System Bypass Switch (Hydraulic Fan, Steering Oil Filter)
C7.1 Industrial Engine and Generator Set Multiposition Switch Setup
G3304B and G3306B Engines Housing (Front) - Remove
G3304B and G3306B Engines Housing (Front) - Install
Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239} Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239}