Housing (Front) - Remove
拆卸步骤
开始:
- 拆下水泵。
- 拆下附件驱动。
- 拆下发动机转速传感器。
- 拆下曲轴前油封。
- 拆下前发动机支架。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 拆下螺栓 (2) 、螺栓 (3) 、盖 (1) 和密封垫。
Show/hide table
 | |
| 图 1 | g01952803 |
- 拆下螺栓 (6) 、挡圈 (7) 和适配器 (8) 。
Show/hide table
 | |
| 图 2 | g01952804 |
- 拆下将前壳体 (5) 在发动机上固定在位的螺栓 (4) 和螺栓 (9) 。 从发动机上拆下前壳体 (5) 和密封垫。
Caterpillar Information System:
C7.1 Industrial Engine and Generator Set Multiposition Switch Setup
797F and 797F XQ Off-Highway Truck Steering System Bypass Switch (Hydraulic Fan, Steering Oil Filter)
797F and 797F XQ Off-Highway Truck Braking System Gear Motor (Rear Axle Lubrication)
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
793F Off-Highway Truck Engine Supplement Water Pump (Engine) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
C13 Tier 4 Final Engines Rocker Shaft
C15 and C18 Industrial Engines Camshaft Gear - Remove and Install
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Install
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Remove
C7.1 Industrial Engine and Generator Set Throttle Setup
793F Off-Highway Truck Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
G3304B and G3306B Engines Housing (Front) - Install
Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239} Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239}
C9.3 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
14L Motor Grader Water Pump - Remove and Install
G3304B and G3306B Engines Gear Group (Front) - Remove
C7.1 Industrial Engine and Generator Set Mode Switch Setup
797F and 797F XQ Off-Highway Truck Power Train Planetary Case and Parts Group - Front Module
G3304B and G3306B Engines Gear Group (Front) - Install
C9.3 Engines for Caterpillar Built Machines Soot Antenna - Remove and Install
G3304B and G3306B Engines Valve Mechanism Cover - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Flywheel - Remove and Install
793F AC Off-Highway Truck Hydraulic and Braking System Relief Valve (Main)