Gear Motor (Rear Axle Lubrication)
Show/hide table
Illustration 1 | g01952702 |
Displacement per revolution ...
Rotation ... Counterclockwise
Maximum continuous pressure ...
Maximum speed ... 3000 rpm
Minimum speed ... 500 rpm
(1) Assemble the shaft seals on either side of the snap ring (2) with the sealing lips of the shaft seals facing outward.
(2) The gap of the snap ring must be over the weep hole.
(3) Solenoid valve group
- Torque for the nut ...
6 to 7 N·m (53 to 62 lb in) - Final installation torque ...
23 to 27 N·m (204 to 239 lb in) - Nominal operating voltage ... 24 VDC
- Maximum operating voltage ... 28.5 VDC
- Nominal resistance at
25 ± 5 °C (77 ± 9 °F) ... 31.1 ± 2.4 ohms- Minimum resistance at
− 40 °C (− 40 °F) ... 23.3 ohms- Maximum resistance at
121 °C (250 °F) ... 50.3 ohms - Final installation torque ...
(4) Torque for the check valve assembly ...
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
793F Off-Highway Truck Engine Supplement Water Pump (Engine) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
C13 Tier 4 Final Engines Rocker Shaft
C15 and C18 Industrial Engines Camshaft Gear - Remove and Install
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Install
G3304B and G3306B Engines Crankshaft Rear Seal and Wear Sleeve - Remove
C7.1 Industrial Engine and Generator Set Throttle Setup
793F Off-Highway Truck Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
C175-16 and C175-20 Generator Set Engines Fuel System Operation
793F Off-Highway Truck Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
C7.1 Industrial Engine Gauges and Indicators
797F and 797F XQ Off-Highway Truck Steering System Bypass Switch (Hydraulic Fan, Steering Oil Filter)
C7.1 Industrial Engine and Generator Set Multiposition Switch Setup
G3304B and G3306B Engines Housing (Front) - Remove
G3304B and G3306B Engines Housing (Front) - Install
Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239} Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239}
C9.3 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
14L Motor Grader Water Pump - Remove and Install
G3304B and G3306B Engines Gear Group (Front) - Remove
C7.1 Industrial Engine and Generator Set Mode Switch Setup
797F and 797F XQ Off-Highway Truck Power Train Planetary Case and Parts Group - Front Module
G3304B and G3306B Engines Gear Group (Front) - Install
C9.3 Engines for Caterpillar Built Machines Soot Antenna - Remove and Install