G3304B and G3306B Engines Caterpillar


Gear Group (Front) - Remove

Usage:

G3304B A4E

拆卸步骤

开始:

  1. 拆下前壳体。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 1g01952880

  1. 拆下螺栓 (2) 和凸轮轴齿轮 (1) 。 如有必要,拆下螺栓和正时轮。



    图 2g01952881

  1. 拆下螺栓 (3) 。 拆下前板 (4) 和密封垫。

Caterpillar Information System:

14L Motor Grader Water Pump - Remove and Install
C9.3 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239} Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239}
G3304B and G3306B Engines Housing (Front) - Install
G3304B and G3306B Engines Housing (Front) - Remove
C7.1 Industrial Engine and Generator Set Multiposition Switch Setup
797F and 797F XQ Off-Highway Truck Steering System Bypass Switch (Hydraulic Fan, Steering Oil Filter)
797F and 797F XQ Off-Highway Truck Braking System Gear Motor (Rear Axle Lubrication)
C13, C15, and C18 Tier 4 Final Engines Valve Mechanism
793F Off-Highway Truck Engine Supplement Water Pump (Engine) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Fuel Injection Pump - Remove and Install
C13 Tier 4 Final Engines Rocker Shaft
C7.1 Industrial Engine and Generator Set Mode Switch Setup
797F and 797F XQ Off-Highway Truck Power Train Planetary Case and Parts Group - Front Module
G3304B and G3306B Engines Gear Group (Front) - Install
C9.3 Engines for Caterpillar Built Machines Soot Antenna - Remove and Install
G3304B and G3306B Engines Valve Mechanism Cover - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Flywheel - Remove and Install
793F AC Off-Highway Truck Hydraulic and Braking System Relief Valve (Main)
793F AC Off-Highway Truck Hydraulic and Braking System Solenoid Valve (Brake Pump Unloader)
797F and 797F XQ Off-Highway Truck Braking System Slack Adjuster (Front Brakes)
Calculations for Required Inlet Pressure and Back Pressure of the Fuel on C175 Engines that are Utilizing a Day Tank or Standby Application{1250} Calculations for Required Inlet Pressure and Back Pressure of the Fuel on C175 Engines that are Utilizing a Day Tank or Standby Application{1250}
2010/01/18 New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
G3304B and G3306B Engines Rocker Shaft and Push Rod - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.