797F and 797F XQ Off-Highway Truck Power Train Caterpillar

Relief Valve (Transmission Main)

Usage:

797F LAJ

Show/hide table




Illustration 1	g03389368

Show/hide table

Table 1
Specification for 286-7009 Relief Valve Gp
Item	Qty	Part	Specification Description
1	4	6V-5219 Bolt	Torque to 28 ± 7 N·m (248 ± 62 lb in).
2	2	6V-5217 Bolt	Torque to 28 ± 7 N·m (248 ± 62 lb in).
3	1	4M-2381 Spring	Length under test force is 12.2 mm (0.48 inch). Test force is 2.300 ± 0.182 N (0.517 ± 0.041 lb). Free length after test is 22.6 mm (0.89 inch).
4	1	158-6594 Spring	Length under test force is 83.0 mm (3.27 inch). Test force is 1560.0 ± 78.0 N (350.7 ± 17.5 lb). Free length after test is 94.1 mm (3.70 inch).
5	1	5P-7684 Plug	Torque to 225 ± 15 N·m (166 ± 11 lb ft).

Caterpillar Information System:

797 Off-Highway Truck Braking System Service and Parking Brake (Rear)

797F and 797F XQ Off-Highway Truck Power Train Torque Converter Housing

G3512E and G3520E Generator Set Engines Air/Fuel Ratio Control

C11, C13, and C15 On-highway Engines Monitoring System

C11, C13, and C15 On-highway Engines Configuration Parameters

Piston Seizures on C18 Engines{1225, 1331} Piston Seizures on C18 Engines{1225, 1331}

C7.1 Industrial Engine Exhaust Sensor and Lines (NRS)

C3.4B Engines for Caterpillar Built Machines Alternator - Test

797F and 797F XQ Off-Highway Truck Power Train Oil Filter (Differential)

797F and 797F XQ Off-Highway Truck Power Train Torque Converter

Procedure for Installing the Space Heater and Setting the Thermostat on High Voltage Generators{1404, 1408, 4459, 7274} Procedure for Installing the Space Heater and Setting the Thermostat on High Voltage Generators{1404, 1408, 4459, 7274}

C9 Marine Engines Maintenance Recommendations

C7.1 Industrial Engine and Generator Set Diesel Particulate Filter Collects Excessive Soot

797F and 797F XQ Off-Highway Truck Steering System Solenoid and Relief Valve (Steering)

797F and 797F XQ Off-Highway Truck Steering System Solenoid Valve (Steering)

797F and 797F XQ Off-Highway Truck Power Train Differential

C7.1 Industrial Engine and Generator Set Injector Code - Calibrate

2009/08/17 A New Hose Assembly for the Coolant Outlet from the Turbocharger Is Used on Some 3508B and 3512B Engines {1355, 1380, 1393}

2010/10/08 Proper Placement of the Speed Control for Some Gas Engines {1264, 1716, 1908}

C175 Generator Sets Generator Operation

C13 Industrial Engines Electronic Unit Injector

G3304B and G3306B Engines Flywheel - Remove and Install

G3512E and G3520E Generator Set Engines Electronic Control System Parameters

G3304B and G3306B Engines Flywheel Housing - Remove