Lifter Group - Remove and Install
Start By:
- Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
- Remove bolts (1).
- Remove lifter group (2).
Show/hide table
Illustration 1 | g01011606 |
- Position lifter group (2) on the engine.
- Tighten bolts (1) to a torque of
60 ± 12 N·m (45 ± 9 lb ft) .
Show/hide table
Illustration 2 | g01011606 |
End By:
- Install the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Install".
Caterpillar Information System:
C13 Engine Cylinder Head - Install
C13 Engine Cylinder Head - Remove
C13 Engine Rocker Shaft and Pushrod - Install
C13 Engine Rocker Shaft - Assemble
C13 Engine Rocker Shaft - Disassemble
C13 Engine Rocker Shaft and Pushrod - Remove
C13 Engine Valve Actuator (Variable) - Install
C13 Engine Valve Actuator (Variable) - Remove
C13 Engine Valve Mechanism Cover Base - Remove and Install
C13 Engine Valve Mechanism Cover - Remove and Install
C13 Engine Accessory Drive - Install
C13 Engine Accessory Drive - Remove
Inspection of Slag Buckets{6110} Inspection of Slag Buckets{6110}
C13 Engine Camshaft - Remove
C13 Engine Camshaft - Install
C13 Engine Camshaft Bearings - Remove
C13 Engine Camshaft Bearings - Install
C13 Engine Engine Oil Pan - Remove and Install
C13 Engine Cylinder Liner - Remove
C13 Engine Cylinder Liner - Install
C13 Engine Piston Cooling Jets - Remove and Install
C13 Engine Pistons and Connecting Rods - Remove
C13 Engine Pistons and Connecting Rods - Disassemble
C13 Engine Pistons and Connecting Rods - Assemble