Camshaft Bearings - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 201-4214 | Receiving Sleeve | 1 |
201-4213 | Puller Plate | 1 | |
201-4209 | Bearing Pilot | 1 | |
201-4208 | Backup Plate | 1 | |
6F-7032 | Bolt | 1 | |
8M-8778 | Taperlock Stud | 1 | |
8S-8292 | Extension (Short) | 2 | |
8S-8293 | Extension (Long) | 1 | |
B | 185-3989 | Thread Lubricant | 1 |
Start By:
- Remove the lifter group. Refer to Disassembly and Assembly, "Lifter Group - Remove and Install".
- Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install Tooling (A). Apply Tooling (B) on the threads.
- Remove camshaft bearings (1).
Show/hide table
Illustration 1 | g01016694 |
Caterpillar Information System:
C13 Engine Camshaft - Install
C13 Engine Camshaft - Remove
Inspection of Slag Buckets{6110} Inspection of Slag Buckets{6110}
C13 Engine Lifter Group - Remove and Install
C13 Engine Cylinder Head - Install
C13 Engine Cylinder Head - Remove
C13 Engine Rocker Shaft and Pushrod - Install
C13 Engine Rocker Shaft - Assemble
C13 Engine Rocker Shaft - Disassemble
C13 Engine Rocker Shaft and Pushrod - Remove
C13 Engine Valve Actuator (Variable) - Install
C13 Engine Valve Actuator (Variable) - Remove
C13 Engine Camshaft Bearings - Install
C13 Engine Engine Oil Pan - Remove and Install
C13 Engine Cylinder Liner - Remove
C13 Engine Cylinder Liner - Install
C13 Engine Piston Cooling Jets - Remove and Install
C13 Engine Pistons and Connecting Rods - Remove
C13 Engine Pistons and Connecting Rods - Disassemble
C13 Engine Pistons and Connecting Rods - Assemble
C13 Engine Pistons and Connecting Rods - Install
C13 Engine Connecting Rod Bearings - Remove
C13 Engine Connecting Rod Bearings - Install
C13 Engine Crankshaft Main Bearings - Remove