Cylinder Liner - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
C | 2P-8260 | Cylinder Liner Installer | 1 |
D | 5P-3975 | Rubber Lubricant | 1 |
- Install the O-ring seals on cylinder liner (1).
- Apply Tooling (D) on the O-ring seals.
Note: Refer to Testing and Adjusting, "Cylinder Liner Projection" for more information.
Note: If you are installing a cylinder pack, ensure that the corresponding crankshaft throw is at bottom center.
- Use Tooling (C) to install cylinder liner (1).
Show/hide table
Illustration 1 | g01133518 |
End By:
- Install the pistons and the connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Install".
Caterpillar Information System:
C13 Engine Cylinder Liner - Remove
C13 Engine Engine Oil Pan - Remove and Install
C13 Engine Camshaft Bearings - Install
C13 Engine Camshaft Bearings - Remove
C13 Engine Camshaft - Install
C13 Engine Camshaft - Remove
Inspection of Slag Buckets{6110} Inspection of Slag Buckets{6110}
C13 Engine Lifter Group - Remove and Install
C13 Engine Cylinder Head - Install
C13 Engine Cylinder Head - Remove
C13 Engine Rocker Shaft and Pushrod - Install
C13 Engine Rocker Shaft - Assemble
C13 Engine Piston Cooling Jets - Remove and Install
C13 Engine Pistons and Connecting Rods - Remove
C13 Engine Pistons and Connecting Rods - Disassemble
C13 Engine Pistons and Connecting Rods - Assemble
C13 Engine Pistons and Connecting Rods - Install
C13 Engine Connecting Rod Bearings - Remove
C13 Engine Connecting Rod Bearings - Install
C13 Engine Crankshaft Main Bearings - Remove
C13 Engine Crankshaft Main Bearings - Install
C13 Engine Crankshaft - Remove
C13 Engine Crankshaft - Install
C13 Engine Crankshaft Gear - Remove and Install