Rocker Shaft - Assemble
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-0510 | Driver Gp | 1 |
- Use Tooling (A) to install the bushings for the rocker arms. For correct bearing dimensions, refer to Specifications, "Electronic Unit Injector Rocker Arm" and Specifications, "Valve Mechanism".
Show/hide table
Illustration 1 g01015498 - Install stand (5), rocker arms (4), rocker arms (3), and rocker arms (2) onto shaft (6).
Note: Stand (5) has an offset hole.
- Install stands (1).
End By:
- Install the rocker shaft. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Caterpillar Information System:
C13 Engine Rocker Shaft - Disassemble
C13 Engine Rocker Shaft and Pushrod - Remove
C13 Engine Valve Actuator (Variable) - Install
C13 Engine Valve Actuator (Variable) - Remove
C13 Engine Valve Mechanism Cover Base - Remove and Install
C13 Engine Valve Mechanism Cover - Remove and Install
C13 Engine Accessory Drive - Install
C13 Engine Accessory Drive - Remove
2009/04/20 An Improved Exhaust Bellows Assembly Is Used on 3500HD Locomotive Engines {1052, 1053}
789D, 793F, and 797F Off-Highway Truck Monitoring System Charging System
C13 Engine Housing (Front) - Install
C7 On-highway Engine Diesel Particulate Filter Temperature and Pressure Sensor
C13 Engine Rocker Shaft and Pushrod - Install
C13 Engine Cylinder Head - Remove
C13 Engine Cylinder Head - Install
C13 Engine Lifter Group - Remove and Install
Inspection of Slag Buckets{6110} Inspection of Slag Buckets{6110}
C13 Engine Camshaft - Remove
C13 Engine Camshaft - Install
C13 Engine Camshaft Bearings - Remove
C13 Engine Camshaft Bearings - Install
C13 Engine Engine Oil Pan - Remove and Install
C13 Engine Cylinder Liner - Remove
C13 Engine Cylinder Liner - Install