Valve Mechanism Cover Base - Remove and Install
Start By:
- Remove the valve actuator. Refer to Disassembly and Assembly, "Valve Actuator (Variable) - Remove".
- Disconnect harness assembly (1), harness assembly (2), and harness assembly (5).
- Disconnect hose assembly (4).
- Remove bolts (6).
- Remove valve cover base (3).
Show/hide table
| |
| Illustration 1 | g01010524 |
- Position valve cover base (3).
- Install bolts (6).
- Connect hose assembly (4).
- Connect harness assembly (1), harness assembly (2), and harness assembly (5).
Show/hide table
|
| |
| Illustration 2 | g01010524 |
End By:
- Install the valve actuator. Refer to Disassembly and Assembly, "Valve Actuator (Variable) - Install".
Caterpillar Information System:
C13 Engine Valve Mechanism Cover - Remove and Install
C13 Engine Accessory Drive - Install
C13 Engine Accessory Drive - Remove
2009/04/20 An Improved Exhaust Bellows Assembly Is Used on 3500HD Locomotive Engines {1052, 1053}
789D, 793F, and 797F Off-Highway Truck Monitoring System Charging System
C13 Engine Housing (Front) - Install
C7 On-highway Engine Diesel Particulate Filter Temperature and Pressure Sensor
C13 Engine Housing (Front) - Remove
C13 Engine Gear Group (Front) - Install
C15 and C18 Industrial Engines Combustion Head - Remove and Install
C13 Engine Gear Group (Front) - Remove
C13 Engine Front Cover - Install
C13 Engine Valve Actuator (Variable) - Remove
C13 Engine Valve Actuator (Variable) - Install
C13 Engine Rocker Shaft and Pushrod - Remove
C13 Engine Rocker Shaft - Disassemble
C13 Engine Rocker Shaft - Assemble
C13 Engine Rocker Shaft and Pushrod - Install
C13 Engine Cylinder Head - Remove
C13 Engine Cylinder Head - Install
C13 Engine Lifter Group - Remove and Install
Inspection of Slag Buckets{6110} Inspection of Slag Buckets{6110}
C13 Engine Camshaft - Remove
C13 Engine Camshaft - Install