Rocker Shaft and Pushrod - Remove
Start By:
- Remove the valve actuator. Refer to Disassembly and Assembly, "Valve Actuator (Variable) - Remove".
- Remove the studs and nuts (1).
- Remove bolts (2).
- Remove rocker arm shaft (3) and pushrods (4).
Show/hide table
| |
| Illustration 1 | g01137519 |
Caterpillar Information System:
C13 Engine Valve Actuator (Variable) - Install
C13 Engine Valve Actuator (Variable) - Remove
C13 Engine Valve Mechanism Cover Base - Remove and Install
C13 Engine Valve Mechanism Cover - Remove and Install
C13 Engine Accessory Drive - Install
C13 Engine Accessory Drive - Remove
2009/04/20 An Improved Exhaust Bellows Assembly Is Used on 3500HD Locomotive Engines {1052, 1053}
789D, 793F, and 797F Off-Highway Truck Monitoring System Charging System
C13 Engine Housing (Front) - Install
C7 On-highway Engine Diesel Particulate Filter Temperature and Pressure Sensor
C13 Engine Housing (Front) - Remove
C13 Engine Gear Group (Front) - Install
C13 Engine Rocker Shaft - Disassemble
C13 Engine Rocker Shaft - Assemble
C13 Engine Rocker Shaft and Pushrod - Install
C13 Engine Cylinder Head - Remove
C13 Engine Cylinder Head - Install
C13 Engine Lifter Group - Remove and Install
Inspection of Slag Buckets{6110} Inspection of Slag Buckets{6110}
C13 Engine Camshaft - Remove
C13 Engine Camshaft - Install
C13 Engine Camshaft Bearings - Remove
C13 Engine Camshaft Bearings - Install
C13 Engine Engine Oil Pan - Remove and Install