C13 Engine Caterpillar

Removal Procedure

Start By:

1. Remove the air compressor. Refer to Disassembly and Assembly, "Air Compressor - Remove and Install".

2. Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".

3. Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".

4. Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove".

5. Remove the front gear group. Refer to Disassembly and Assembly, "Gear Group (Front) - Remove".

6. Remove the crankshaft position sensor. Refer to Disassembly and Assembly, "Engine Sensors - Remove and Install".

Show/hide table

Illustration 1	g01011130

1. Disconnect sensor (1).

2. Attach a suitable lifting device to the lifting bracket on the front of the engine. The weight of the engine is approximately 680 kg (1500 lb).

3. Remove front engine mount (4).

4. Loosen the oil pan bolts in order to allow the front of the oil pan to drop.

5. Remove bolts (2).

6. Remove front housing (3).