Rocker Shaft - Disassemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1P-0510 | Driver Gp | 1 |
Start By:
- Remove the rocker shaft. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
- Remove stands (1).
- Remove rocker arms (2), rocker arms (3), rocker arms (4), and stand (5) from shaft (6).
- Use Tooling (A) to remove the bushings from the rocker arms.
Show/hide table
Illustration 1 | g01015498 |
Note: Place an identification mark on all components for assembly purposes.
Note: Stand (5) has an offset hole.
Caterpillar Information System:
C13 Engine Rocker Shaft and Pushrod - Remove
C13 Engine Valve Actuator (Variable) - Install
C13 Engine Valve Actuator (Variable) - Remove
C13 Engine Valve Mechanism Cover Base - Remove and Install
C13 Engine Valve Mechanism Cover - Remove and Install
C13 Engine Accessory Drive - Install
C13 Engine Accessory Drive - Remove
2009/04/20 An Improved Exhaust Bellows Assembly Is Used on 3500HD Locomotive Engines {1052, 1053}
789D, 793F, and 797F Off-Highway Truck Monitoring System Charging System
C13 Engine Housing (Front) - Install
C7 On-highway Engine Diesel Particulate Filter Temperature and Pressure Sensor
C13 Engine Housing (Front) - Remove
C13 Engine Rocker Shaft - Assemble
C13 Engine Rocker Shaft and Pushrod - Install
C13 Engine Cylinder Head - Remove
C13 Engine Cylinder Head - Install
C13 Engine Lifter Group - Remove and Install
Inspection of Slag Buckets{6110} Inspection of Slag Buckets{6110}
C13 Engine Camshaft - Remove
C13 Engine Camshaft - Install
C13 Engine Camshaft Bearings - Remove
C13 Engine Camshaft Bearings - Install
C13 Engine Engine Oil Pan - Remove and Install
C13 Engine Cylinder Liner - Remove