Flywheel Housing - Remove and Install
Start By:
- Remove the flywheel. Refer to Disassembly and Assembly, " Flywheel - Remove".
- Support the engine with blocks or a suitable lifting device.
Show/hide table
Illustration 1 g01011078 - Remove bolts (1).
- Remove flywheel housing (2). The weight of the flywheel housing is approximately
23 kg (50 lb) .Show/hide tableIllustration 2 g01011079 - Remove O-ring seal (3) from rear seal carrier (4).
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-6396 | O-Ring Assembly Compound | 1 |
B | 1U-8846 | Gasket Sealant | 1 |
- Apply Tooling (A) to O-ring seal (4). Install O-ring seal (3) onto rear seal carrier (4).
- Apply Tooling (B) to the face of the cylinder block.
Show/hide table
Illustration 4 g01011078 - Position flywheel housing (2) on the rear of the cylinder block. The weight of flywheel housing (2) is approximately
23 kg (50 lb) . - Install bolts (1).
Show/hide table
Illustration 3 | g01011079 |
End By:
- Install the flywheel. Refer to Disassembly and Assembly, " Flywheel - Install".
Caterpillar Information System:
C13 Engine Flywheel - Install
C13 Engine Flywheel - Remove
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562} Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
C13 Engine Water Temperature Regulator - Remove and Install
C13 Engine Water Pump - Install
C13 Engine Water Pump - Remove
3512C Engine for 785D Off-Highway Truck/Tractors Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
C13 Engine Engine Oil Pump - Install
C13 Engine Engine Oil Pump - Assemble
C13 Engine Engine Oil Pump - Disassemble
C13 Engine Engine Oil Pump - Remove
C13 Engine Rear Power Take-Off (RPTO) - Remove
C7 On-highway Engine Diesel Particulate Filter
C13 Engine Rear Power Take-Off (RPTO) - Install
C13 Engine Crankshaft Front Seal - Remove
C13 Engine Crankshaft Front Seal - Install
C13 Engine Front Cover - Remove
C13 Engine Front Cover - Install
C13 Engine Gear Group (Front) - Remove
C15 and C18 Industrial Engines Combustion Head - Remove and Install
C13 Engine Gear Group (Front) - Install
C13 Engine Housing (Front) - Remove
C7 On-highway Engine Diesel Particulate Filter Temperature and Pressure Sensor