986K Wheel Loader Systems Caterpillar


Rear View Mirror

Usage:

986K MH8


Illustration 1g06302945
Top view of machine

Table 1
Item  Qty  Part  Specification Description 
8T-4196 Bolt  Torque to 25 ± 5 N·m (221 ± 44 lb in)


Illustration 2g06303202
214-0647 Mirror As

Table 2
Item  Qty  Part  Specification Description 
214-0647 Mirror As  Installation Torque is 3.25 ± 0.25 N·m (28.76 ± 2.21 lb in)

Caterpillar Information System:

New Operator Monitor Group Is Now Used on Certain D5R, D6K, D6N, D6T, D8R, and D8T Track-Type Tractors {1408, 7490} New Operator Monitor Group Is Now Used on Certain D5R, D6K, D6N, D6T, D8R, and D8T Track-Type Tractors {1408, 7490}
986K Wheel Loader Systems Flood Lamp
Fuel Priming Pump on Certain C1.7 and C2.2 Engines {1258} Fuel Priming Pump on Certain C1.7 and C2.2 Engines {1258}
988K XE Wheel Loader Main Control Valve
C175-16 and C175-20 Locomotive Engines Control Cabinet - Assemble
D9R Track-Type Tractor Engine Supplement Air Cleaner - Remove and Install
C175-16 and C175-20 Locomotive Engines Control Cabinet - Disassemble
986K Wheel Loader Engine Supplement Fan Drive Motor - Remove and Install
C175–16 Locomotive Engine Lubrication System Operation
New Enclosure Assemblies for the Platform Enclosure Group Are Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7187, 7253, 7301} New Enclosure Assemblies for the Platform Enclosure Group Are Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7187, 7253, 7301}
C175-16 and C175-20 Locomotive Engines Catalyst (SCR) - Remove and Install
Improved Hose Routing for the Ripper Tilt Cylinder Hose Assembles Are Now Used On Certain D11T Track-Type Tractors {5057, 5354, 5356, 6310} Improved Hose Routing for the Ripper Tilt Cylinder Hose Assembles Are Now Used On Certain D11T Track-Type Tractors {5057, 5354, 5356, 6310}
Fuse Installation Procedure for Product Link PL631 on Certain 950 GC Medium Wheel Loaders {1417, 7606} Fuse Installation Procedure for Product Link PL631 on Certain 950 GC Medium Wheel Loaders {1417, 7606}
CX48–P2560–3060 Petroleum Transmission Relief Valve (Transmission Lubrication)
CX48–P2560–3060 Petroleum Transmission Speed Sensor (Transmission)
C175-16 and C175-20 Locomotive Engines Clean Emissions Module - Remove and Install
330 and 330 GC Excavator Machine System Swing System
CG137-08 Engine Plate Locations and Film Locations
CG137-08 Engine Product Lifting
CG137-08 Engine Control Panel
C175-16 and C175-20 Locomotive Engines Turbocharger - Remove
CG137-08 Engine Sensors and Electrical Components
C175-16 and C175-20 Locomotive Engines Turbocharger - Install
C175-16 and C175-20 Locomotive Engines Exhaust Manifold - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.