Air Cleaner - Remove and Install
- Remove bolts (1).
- Disconnect hose (3) and hose (4).
Show/hide table
Illustration 3 g06302919 - Remove bolts (5) and engine guard (6).
Show/hide table
Illustration 4 g06302920 Show/hide tableIllustration 5 g06302926 - The weight of air cleaner assembly is approximately
41 kg (90 lb) . - Remove bolts (7) and use two people to stabilize and remove air cleaner (8). The weight of air cleaner assembly is approximately
41 kg (90 lb) .
Show/hide table
Illustration 1 | g06302682 |
Show/hide table
Illustration 2 | g06302685 |
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 369-9451 | Grease | - |
- Install air cleaner (8) in the reverse order of removal.
- Apply a thin coat of Tooling (A) to the bore of air cleaner (8)
Caterpillar Information System:
C175-16 and C175-20 Locomotive Engines Control Cabinet - Disassemble
986K Wheel Loader Engine Supplement Fan Drive Motor - Remove and Install
C175–16 Locomotive Engine Lubrication System Operation
New Enclosure Assemblies for the Platform Enclosure Group Are Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7187, 7253, 7301} New Enclosure Assemblies for the Platform Enclosure Group Are Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7187, 7253, 7301}
C175-16 and C175-20 Locomotive Engines Catalyst (SCR) - Remove and Install
Improved Hose Routing for the Ripper Tilt Cylinder Hose Assembles Are Now Used On Certain D11T Track-Type Tractors {5057, 5354, 5356, 6310} Improved Hose Routing for the Ripper Tilt Cylinder Hose Assembles Are Now Used On Certain D11T Track-Type Tractors {5057, 5354, 5356, 6310}
D8T Track-Type Tractor Engine Supplement Electronic Control (Diesel Exhaust Fluid) - Remove and Install
986K Wheel Loader Systems Fasteners - Front housing
A Procedure Is Available for Installing Anti-Drift Ripper Valves on Certain D6T Track-Type Tractors {5050, 5057, 5352, 5356, 6310, 6325} A Procedure Is Available for Installing Anti-Drift Ripper Valves on Certain D6T Track-Type Tractors {5050, 5057, 5352, 5356, 6310, 6325}
C175–16 Locomotive Engine Dosing Control System Operation
CX48–P2560–3060 Petroleum Transmission Transmission Hydraulic Control
D8T Track-Type Tractor General Information (HVAC System)
C175-16 and C175-20 Locomotive Engines Control Cabinet - Assemble
988K XE Wheel Loader Main Control Valve
Fuel Priming Pump on Certain C1.7 and C2.2 Engines {1258} Fuel Priming Pump on Certain C1.7 and C2.2 Engines {1258}
986K Wheel Loader Systems Flood Lamp
New Operator Monitor Group Is Now Used on Certain D5R, D6K, D6N, D6T, D8R, and D8T Track-Type Tractors {1408, 7490} New Operator Monitor Group Is Now Used on Certain D5R, D6K, D6N, D6T, D8R, and D8T Track-Type Tractors {1408, 7490}
986K Wheel Loader Systems Rear View Mirror
Fuse Installation Procedure for Product Link PL631 on Certain 950 GC Medium Wheel Loaders {1417, 7606} Fuse Installation Procedure for Product Link PL631 on Certain 950 GC Medium Wheel Loaders {1417, 7606}
CX48–P2560–3060 Petroleum Transmission Relief Valve (Transmission Lubrication)
CX48–P2560–3060 Petroleum Transmission Speed Sensor (Transmission)
C175-16 and C175-20 Locomotive Engines Clean Emissions Module - Remove and Install
330 and 330 GC Excavator Machine System Swing System
CG137-08 Engine Plate Locations and Film Locations