D8T Track-Type Tractor Engine Supplement Caterpillar


Electronic Control (Diesel Exhaust Fluid) - Remove and Install

Usage:

D8T AW4

Removal Procedure



    Illustration 1g06302351

  1. Remove bolts (1) and plate (2).


    Illustration 2g06302412

    Note: Use locking tabs (3) to disconnect harness assemblies (4).

  2. Disconnect harness assemblies (4).

  3. Remove bolts (6) and electronic control (diesel exhaust fluid) (5).

Installation Procedure

  1. Install electronic control (diesel exhaust fluid) (5) in the reverse order of removal.

    1. Tighten bolts (6) to a torque of 10 ± 2 N·m (89 ± 18 lb in).

Caterpillar Information System:

986K Wheel Loader Systems Fasteners - Front housing
A Procedure Is Available for Installing Anti-Drift Ripper Valves on Certain D6T Track-Type Tractors {5050, 5057, 5352, 5356, 6310, 6325} A Procedure Is Available for Installing Anti-Drift Ripper Valves on Certain D6T Track-Type Tractors {5050, 5057, 5352, 5356, 6310, 6325}
C175–16 Locomotive Engine Dosing Control System Operation
CX48–P2560–3060 Petroleum Transmission Transmission Hydraulic Control
D8T Track-Type Tractor General Information (HVAC System)
C175–16 Locomotive Engine Air Inlet and Exhaust System Operation - Aftertreatment
986K Wheel Loader Engine Supplement Radiator Cover - Remove and Install
903D Compact Wheel Loader Systems Location of Components (Power Train System)
D8T Track-Type Tractor Transmission Clutch Pressure - Test
CX48–P2560–3060 Petroleum Transmission Transmission Hydraulic System
336 Excavator Machine Systems Stick - Remove and Install
903D Compact Wheel Loader Systems General Information (Power Train System)
Improved Hose Routing for the Ripper Tilt Cylinder Hose Assembles Are Now Used On Certain D11T Track-Type Tractors {5057, 5354, 5356, 6310} Improved Hose Routing for the Ripper Tilt Cylinder Hose Assembles Are Now Used On Certain D11T Track-Type Tractors {5057, 5354, 5356, 6310}
C175-16 and C175-20 Locomotive Engines Catalyst (SCR) - Remove and Install
New Enclosure Assemblies for the Platform Enclosure Group Are Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7187, 7253, 7301} New Enclosure Assemblies for the Platform Enclosure Group Are Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7187, 7253, 7301}
C175–16 Locomotive Engine Lubrication System Operation
986K Wheel Loader Engine Supplement Fan Drive Motor - Remove and Install
C175-16 and C175-20 Locomotive Engines Control Cabinet - Disassemble
D9R Track-Type Tractor Engine Supplement Air Cleaner - Remove and Install
C175-16 and C175-20 Locomotive Engines Control Cabinet - Assemble
988K XE Wheel Loader Main Control Valve
Fuel Priming Pump on Certain C1.7 and C2.2 Engines {1258} Fuel Priming Pump on Certain C1.7 and C2.2 Engines {1258}
986K Wheel Loader Systems Flood Lamp
New Operator Monitor Group Is Now Used on Certain D5R, D6K, D6N, D6T, D8R, and D8T Track-Type Tractors {1408, 7490} New Operator Monitor Group Is Now Used on Certain D5R, D6K, D6N, D6T, D8R, and D8T Track-Type Tractors {1408, 7490}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.