Location of Components (Power Train System)
Show/hide table
Illustration 1 | g06302088 |
(1) Accel pedal
(2) F-N-R switch (3) Creeper control (4) Throttle lock |
Accel pedal (1) is on the right side of the floor in the cab.
F-N-R switch (2) is on the joystick to the right of the operator seat.
Creeper control (3) is on the right console in the cab.
Throttle lock (4) is on the right console in the cab.
Show/hide table
Illustration 2 | g06302575 |
Front axle (5) is attached to the front frame on the underside of the machine.
Driveshaft (6) is connected to the front and rear axle on the underside of the machine.
Rear axle (7) is attached to the rear frame on the underside of the machine.
Show/hide table
Illustration 3 | g06302592 |
Charge pump (8) is mounted to the hydrostatic pump at the rear of the engine.
Hydrostatic pump (9) is mounted to the rear of the engine.
Show/hide table
Illustration 4 | g06302584 |
The hydrostatic motor is mounted above the driveshaft just in front of the rear axle.
Caterpillar Information System:
D8T Track-Type Tractor Transmission Clutch Pressure - Test
CX48–P2560–3060 Petroleum Transmission Transmission Hydraulic System
336 Excavator Machine Systems Stick - Remove and Install
903D Compact Wheel Loader Systems General Information (Power Train System)
988K XE Wheel Loader Piston Pump (Implement) - Variable Displacement
330 and 330 GC Excavator Machine System Swing Drive
330 and 330 GC Excavator Machine System Solenoid Valve (Fine Swing) - If Equipped
330 and 330 GC Excavator Machine System Relief Valve (Cushion Crossover) - Anti-Reaction Valve
330 and 330 GC Excavator Machine System Relief Valve (Swing)
330 and 330 GC Excavator Machine System Swing Motor
330 and 330 GC Excavator Machine System Machine System
330 and 330 GC Excavator Machine System Return Hydraulic System
986K Wheel Loader Engine Supplement Radiator Cover - Remove and Install
C175–16 Locomotive Engine Air Inlet and Exhaust System Operation - Aftertreatment
D8T Track-Type Tractor General Information (HVAC System)
CX48–P2560–3060 Petroleum Transmission Transmission Hydraulic Control
C175–16 Locomotive Engine Dosing Control System Operation
A Procedure Is Available for Installing Anti-Drift Ripper Valves on Certain D6T Track-Type Tractors {5050, 5057, 5352, 5356, 6310, 6325} A Procedure Is Available for Installing Anti-Drift Ripper Valves on Certain D6T Track-Type Tractors {5050, 5057, 5352, 5356, 6310, 6325}
986K Wheel Loader Systems Fasteners - Front housing
D8T Track-Type Tractor Engine Supplement Electronic Control (Diesel Exhaust Fluid) - Remove and Install
Improved Hose Routing for the Ripper Tilt Cylinder Hose Assembles Are Now Used On Certain D11T Track-Type Tractors {5057, 5354, 5356, 6310} Improved Hose Routing for the Ripper Tilt Cylinder Hose Assembles Are Now Used On Certain D11T Track-Type Tractors {5057, 5354, 5356, 6310}
C175-16 and C175-20 Locomotive Engines Catalyst (SCR) - Remove and Install
New Enclosure Assemblies for the Platform Enclosure Group Are Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7187, 7253, 7301} New Enclosure Assemblies for the Platform Enclosure Group Are Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7187, 7253, 7301}
C175–16 Locomotive Engine Lubrication System Operation