336 Excavator Machine Systems Caterpillar


Stick - Remove and Install

Usage:

336 DKS

拆卸步骤

参考: 专门说明书, "目视维修步骤 - 颜色和符号" M0066576。

表 1
所需工具 
工具  零件号  零件描述  数量 
8S-7615  销组件 
284-5122 台架组件 
8S-7641 管 
8S-8048 鞍座 
1U-9204  杠杆式拉拔举倾机构总成 

开始:

  1. 拆下快速连接器。

  2. 拆下铲斗油缸。


图 1g06301688
3. 释放系统压力。
4. 排放液压油。 有关排放和加注步骤,请参阅 M0082496 , "操作和保养手册" , 液压系统油 - 更换。


图 2g06302468


图 3g06302932


图 4g06302944


图 5g06302980


图 6g06302961


图 7g06303111


图 8g06303120

安装步骤

  1. 按与拆卸相反的顺序安装斗杆。

Caterpillar Information System:

903D Compact Wheel Loader Systems General Information (Power Train System)
988K XE Wheel Loader Piston Pump (Implement) - Variable Displacement
330 and 330 GC Excavator Machine System Swing Drive
330 and 330 GC Excavator Machine System Solenoid Valve (Fine Swing) - If Equipped
330 and 330 GC Excavator Machine System Relief Valve (Cushion Crossover) - Anti-Reaction Valve
330 and 330 GC Excavator Machine System Relief Valve (Swing)
330 and 330 GC Excavator Machine System Swing Motor
330 and 330 GC Excavator Machine System Machine System
330 and 330 GC Excavator Machine System Return Hydraulic System
986K Wheel Loader Engine Supplement Crankshaft Front Seal and Wear Sleeve - Remove and Install
336 Excavator Machine Systems Stick Cylinder - Remove and Install
D9R Track-Type Tractor Power Train Final Drive Planetary Carrier (In Chassis) - Remove and Install
CX48–P2560–3060 Petroleum Transmission Transmission Hydraulic System
D8T Track-Type Tractor Transmission Clutch Pressure - Test
903D Compact Wheel Loader Systems Location of Components (Power Train System)
986K Wheel Loader Engine Supplement Radiator Cover - Remove and Install
C175–16 Locomotive Engine Air Inlet and Exhaust System Operation - Aftertreatment
D8T Track-Type Tractor General Information (HVAC System)
CX48–P2560–3060 Petroleum Transmission Transmission Hydraulic Control
C175–16 Locomotive Engine Dosing Control System Operation
A Procedure Is Available for Installing Anti-Drift Ripper Valves on Certain D6T Track-Type Tractors {5050, 5057, 5352, 5356, 6310, 6325} A Procedure Is Available for Installing Anti-Drift Ripper Valves on Certain D6T Track-Type Tractors {5050, 5057, 5352, 5356, 6310, 6325}
986K Wheel Loader Systems Fasteners - Front housing
D8T Track-Type Tractor Engine Supplement Electronic Control (Diesel Exhaust Fluid) - Remove and Install
Improved Hose Routing for the Ripper Tilt Cylinder Hose Assembles Are Now Used On Certain D11T Track-Type Tractors {5057, 5354, 5356, 6310} Improved Hose Routing for the Ripper Tilt Cylinder Hose Assembles Are Now Used On Certain D11T Track-Type Tractors {5057, 5354, 5356, 6310}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.