330 and 330 GC Excavator Machine System Caterpillar


Solenoid Valve (Fine Swing) - If Equipped

Usage:

330 GC FEK


图 1g06303549
回转马达
(1) 缸体
(2) 回转马达
(3) 回转微调电磁阀


图 2g06200189
精细回转开启
(1) 缸体
(2) 回转马达
(3) 回转微调电磁阀
(4) 弹簧
(5) 油道
(6) 油道
(7) 油道
(8) 油道
(9) 节流孔
(10) 主控制阀
(11) 回转控制阀
(12) 泵 1
(13) 泵 2

由监视器设置精细回转功能。

安装回转微调控制装置的目的是确保精确的回转动作,而使冲击载荷最小。 通过平衡油道 (6) 和 (7) 中的机油压力来实现本功能。

精细回转电磁阀 (3) 断电时,精细回转阀位于中间位置。 在中间位置,油道 (8) 和 (5) 形成闭合连接。 在此位置,回转回路以正常方式工作。

当精细回转控制开关接通时,电磁阀 (3) 通电。 精细回转阀克服弹簧 (4) 的弹力移动。 精细回转阀位于此位置时,油道 (6) 经油道 (8) 和 (5) 接通油道 (7)。 缸体 (1) 中的节流孔 (9) 控制流速。

注: 当精细回转控制电磁阀接通时,回转制动器断开。

Caterpillar Information System:

330 and 330 GC Excavator Machine System Relief Valve (Cushion Crossover) - Anti-Reaction Valve
330 and 330 GC Excavator Machine System Relief Valve (Swing)
330 and 330 GC Excavator Machine System Swing Motor
330 and 330 GC Excavator Machine System Machine System
330 and 330 GC Excavator Machine System Return Hydraulic System
986K Wheel Loader Engine Supplement Crankshaft Front Seal and Wear Sleeve - Remove and Install
336 Excavator Machine Systems Stick Cylinder - Remove and Install
D9R Track-Type Tractor Power Train Final Drive Planetary Carrier (In Chassis) - Remove and Install
986K Wheel Loader Engine Supplement Water Temperature Regulator - Remove and Install
C175-16 Locomotive Engine Air Lines
Installation of Bulldozer with a Single Tilt Cylinder on D8R and D8T Track-Type Tractor {6050, 6053, 6060, 6078} Installation of Bulldozer with a Single Tilt Cylinder on D8R and D8T Track-Type Tractor {6050, 6053, 6060, 6078}
Soot Sensor Module on Certain C4.4 and C7.1 Machine Engines {108F, 1335} Soot Sensor Module on Certain C4.4 and C7.1 Machine Engines {108F, 1335}
330 and 330 GC Excavator Machine System Swing Drive
988K XE Wheel Loader Piston Pump (Implement) - Variable Displacement
903D Compact Wheel Loader Systems General Information (Power Train System)
336 Excavator Machine Systems Stick - Remove and Install
CX48–P2560–3060 Petroleum Transmission Transmission Hydraulic System
D8T Track-Type Tractor Transmission Clutch Pressure - Test
903D Compact Wheel Loader Systems Location of Components (Power Train System)
986K Wheel Loader Engine Supplement Radiator Cover - Remove and Install
C175–16 Locomotive Engine Air Inlet and Exhaust System Operation - Aftertreatment
D8T Track-Type Tractor General Information (HVAC System)
CX48–P2560–3060 Petroleum Transmission Transmission Hydraulic Control
C175–16 Locomotive Engine Dosing Control System Operation
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.