General Information (HVAC System)
Show/hide table
Illustration 1 | g06302165 |
(1) HVAC operator panel
(2) Air conditioning switch (3) Louver temperature sensor (4) Heater coil (5) Evaporator coil (6) Blower (7) Return air temperature sensor (8) A/C clutch (9) A/C compressor (10) Condenser (11) Low-pressure sensor (12) High-pressure sensor (13) Accumulator (14) Dryer (15) Water valve actuator |
The standard automatic temperature control HVAC system allows for the temperature of the cab to be controlled by continuously varying the position of a water valve and appropriately turning on and off the operation of the A/C compressor. The temperature can be controlled by the HVAC automatically or manually by the operator. The HVAC system is electronically controlled through the Implement ECM.
Caterpillar Information System:
C175–16 Locomotive Engine Air Inlet and Exhaust System Operation - Aftertreatment
986K Wheel Loader Engine Supplement Radiator Cover - Remove and Install
903D Compact Wheel Loader Systems Location of Components (Power Train System)
D8T Track-Type Tractor Transmission Clutch Pressure - Test
CX48–P2560–3060 Petroleum Transmission Transmission Hydraulic System
336 Excavator Machine Systems Stick - Remove and Install
903D Compact Wheel Loader Systems General Information (Power Train System)
988K XE Wheel Loader Piston Pump (Implement) - Variable Displacement
330 and 330 GC Excavator Machine System Swing Drive
330 and 330 GC Excavator Machine System Solenoid Valve (Fine Swing) - If Equipped
330 and 330 GC Excavator Machine System Relief Valve (Cushion Crossover) - Anti-Reaction Valve
330 and 330 GC Excavator Machine System Relief Valve (Swing)
CX48–P2560–3060 Petroleum Transmission Transmission Hydraulic Control
C175–16 Locomotive Engine Dosing Control System Operation
A Procedure Is Available for Installing Anti-Drift Ripper Valves on Certain D6T Track-Type Tractors {5050, 5057, 5352, 5356, 6310, 6325} A Procedure Is Available for Installing Anti-Drift Ripper Valves on Certain D6T Track-Type Tractors {5050, 5057, 5352, 5356, 6310, 6325}
986K Wheel Loader Systems Fasteners - Front housing
D8T Track-Type Tractor Engine Supplement Electronic Control (Diesel Exhaust Fluid) - Remove and Install
Improved Hose Routing for the Ripper Tilt Cylinder Hose Assembles Are Now Used On Certain D11T Track-Type Tractors {5057, 5354, 5356, 6310} Improved Hose Routing for the Ripper Tilt Cylinder Hose Assembles Are Now Used On Certain D11T Track-Type Tractors {5057, 5354, 5356, 6310}
C175-16 and C175-20 Locomotive Engines Catalyst (SCR) - Remove and Install
New Enclosure Assemblies for the Platform Enclosure Group Are Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7187, 7253, 7301} New Enclosure Assemblies for the Platform Enclosure Group Are Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7187, 7253, 7301}
C175–16 Locomotive Engine Lubrication System Operation
986K Wheel Loader Engine Supplement Fan Drive Motor - Remove and Install
C175-16 and C175-20 Locomotive Engines Control Cabinet - Disassemble
D9R Track-Type Tractor Engine Supplement Air Cleaner - Remove and Install