Fan Drive Motor - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 6V-3009 | Crossbar | 1 |
8T-6466 | Bolt | 2 | |
6V-4832 | Forcing Bolt | 1 | |
B | - | Loctite 271 | 1 |
- Remove clip assemblies (1) and grill assembly (2).
Show/hide table
Illustration 2 g06302914 - Disconnect hose assemblies (3). Remove the bolts for mounting bracket (5). Position hose assemblies (3) out of the way.
- Disconnect harness assembly (4).
Show/hide table
Illustration 3 g06303387 - Attach a suitable lifting device to support assembly (7). The combined weight of the fan, fan motor, and fan support assembly (7) is approximately
76 kg (168 lb) .Show/hide tableIllustration 4 g06303531 - Remove bolts (10), nut (9), and fan (8).
Show/hide table
Illustration 5 g06303894 Typical example - Use Tooling (A) to remove hub (12) from fan drive motor (11).
Show/hide table
Illustration 6 g06303900 - Remove bolts (13) and fan drive motor (11).
Show/hide table
Illustration 1 | g06302641 |
- Install fan drive motor (11) in the reverse order of removal.
- Apply Tooling (B) to nut (9). Tighten nut (9) to a torque of
340 ± 40 N·m (251 ± 30 lb ft) .
Caterpillar Information System:
C175–16 Locomotive Engine Lubrication System Operation
New Enclosure Assemblies for the Platform Enclosure Group Are Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7187, 7253, 7301} New Enclosure Assemblies for the Platform Enclosure Group Are Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {7187, 7253, 7301}
C175-16 and C175-20 Locomotive Engines Catalyst (SCR) - Remove and Install
Improved Hose Routing for the Ripper Tilt Cylinder Hose Assembles Are Now Used On Certain D11T Track-Type Tractors {5057, 5354, 5356, 6310} Improved Hose Routing for the Ripper Tilt Cylinder Hose Assembles Are Now Used On Certain D11T Track-Type Tractors {5057, 5354, 5356, 6310}
D8T Track-Type Tractor Engine Supplement Electronic Control (Diesel Exhaust Fluid) - Remove and Install
986K Wheel Loader Systems Fasteners - Front housing
A Procedure Is Available for Installing Anti-Drift Ripper Valves on Certain D6T Track-Type Tractors {5050, 5057, 5352, 5356, 6310, 6325} A Procedure Is Available for Installing Anti-Drift Ripper Valves on Certain D6T Track-Type Tractors {5050, 5057, 5352, 5356, 6310, 6325}
C175–16 Locomotive Engine Dosing Control System Operation
CX48–P2560–3060 Petroleum Transmission Transmission Hydraulic Control
D8T Track-Type Tractor General Information (HVAC System)
C175–16 Locomotive Engine Air Inlet and Exhaust System Operation - Aftertreatment
986K Wheel Loader Engine Supplement Radiator Cover - Remove and Install
C175-16 and C175-20 Locomotive Engines Control Cabinet - Disassemble
D9R Track-Type Tractor Engine Supplement Air Cleaner - Remove and Install
C175-16 and C175-20 Locomotive Engines Control Cabinet - Assemble
988K XE Wheel Loader Main Control Valve
Fuel Priming Pump on Certain C1.7 and C2.2 Engines {1258} Fuel Priming Pump on Certain C1.7 and C2.2 Engines {1258}
986K Wheel Loader Systems Flood Lamp
New Operator Monitor Group Is Now Used on Certain D5R, D6K, D6N, D6T, D8R, and D8T Track-Type Tractors {1408, 7490} New Operator Monitor Group Is Now Used on Certain D5R, D6K, D6N, D6T, D8R, and D8T Track-Type Tractors {1408, 7490}
986K Wheel Loader Systems Rear View Mirror
Fuse Installation Procedure for Product Link PL631 on Certain 950 GC Medium Wheel Loaders {1417, 7606} Fuse Installation Procedure for Product Link PL631 on Certain 950 GC Medium Wheel Loaders {1417, 7606}
CX48–P2560–3060 Petroleum Transmission Relief Valve (Transmission Lubrication)
CX48–P2560–3060 Petroleum Transmission Speed Sensor (Transmission)
C175-16 and C175-20 Locomotive Engines Clean Emissions Module - Remove and Install