CG137-08 Engine Caterpillar


Sensors and Electrical Components

Usage:

CG137-08 ST8


Illustration 1g06303498
View of the left side of a CG137-08 Petroleum Engine (Precleaner removed)
(1) Temperature sensor
(2) Fuel pressure sensor
(3) Crankshaft speed sensor


Illustration 2g06303501
View of the right side of a CG137-08 Petroleum Engine
(4) Coolant temperature sensor
(5) Inlet manifold temperature sensor
(6) Exhaust temperature sensor
(7) Filtered oil pressure sensor
(8) Unfiltered oil pressure sensor
(9) Oil temperature sensor


Illustration 3g06303515
Partial view of the rear of a CG137-08 Petroleum Engine
(10) Turbocharger exhaust inlet temperature sensor
(11) Inlet air differential pressure sensor


Illustration 4g06303553
Partial view of the front of a CG137-08 Petroleum Engine (Control box and mounting group removed)
(12) Camshaft speed sensor
(13) Inlet manifold pressure sensor
(14) Inlet manifold temperature sensor

Caterpillar Information System:

C175-16 and C175-20 Locomotive Engines Turbocharger - Remove
CG137-08 Engine Control Panel
CG137-08 Engine Product Lifting
CG137-08 Engine Plate Locations and Film Locations
330 and 330 GC Excavator Machine System Swing System
C175-16 and C175-20 Locomotive Engines Clean Emissions Module - Remove and Install
CX48–P2560–3060 Petroleum Transmission Speed Sensor (Transmission)
CX48–P2560–3060 Petroleum Transmission Relief Valve (Transmission Lubrication)
Fuse Installation Procedure for Product Link PL631 on Certain 950 GC Medium Wheel Loaders {1417, 7606} Fuse Installation Procedure for Product Link PL631 on Certain 950 GC Medium Wheel Loaders {1417, 7606}
986K Wheel Loader Systems Rear View Mirror
New Operator Monitor Group Is Now Used on Certain D5R, D6K, D6N, D6T, D8R, and D8T Track-Type Tractors {1408, 7490} New Operator Monitor Group Is Now Used on Certain D5R, D6K, D6N, D6T, D8R, and D8T Track-Type Tractors {1408, 7490}
986K Wheel Loader Systems Flood Lamp
C175-16 and C175-20 Locomotive Engines Turbocharger - Install
C175-16 and C175-20 Locomotive Engines Exhaust Manifold - Remove and Install
CG137-8 Gas Engine Engine Control Switch - Test
New Final Drive Ring Gear Is Now Available for Field Installation on Certain Track-Type Tractors {4050} New Final Drive Ring Gear Is Now Available for Field Installation on Certain Track-Type Tractors {4050}
330 and 330 GC Excavator Machine System Travel System
CG137-08 Engine Engine Oil and Filter - Change
903D Compact Wheel Loaders Machine Systems Lift Cylinder
903D Compact Wheel Loaders Machine Systems Bucket Control
C175-16 and C175-20 Locomotive Engines Electric Starting Motor - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications Accumulator (Pilot)
336, 336 GC and 340 Excavator Systems Accumulator (Pilot)
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734} Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.