Engine Oil Filler and Oil Level Gauge - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove the bolts and cover (1) with the oil filler and the oil level gauge. Remove the O-ring seal from cover (1).
- Remove gauge (2).
- Remove tube (3) and the gasket.
- Remove support (5).
- Remove elbow (4) and the gaskets.
Note: Refer to Disassembly and Assembly, "General Information (Reference Material)" for more information.
Show/hide table
Illustration 1 | g00611965 |
Show/hide table
Illustration 2 | g00611967 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Loctitie 536 | - |
B | - | Loctite LB 8632 Silicone Lubricant (1) | - |
- | Loctite LB 8104 Silicone Lubricant (2) | - | |
- | Loctite LB 8801 Silicone Lubricant (3) | - | |
- | Loctite LB Superlube (4) | - |
Show/hide table
(1) | North America |
(2) | EAME |
(3) | Asia Pacific Division |
(4) | South America |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Inspect all parts and replace parts when replacement is required.
Show/hide table
Illustration 3 g00611967 Show/hide tableIllustration 4 g00611965 - Install elbow (4) on cover (1) with new gaskets.
- Install support (5).
- Install tube (3) with a new gasket. Apply Tooling (A) to the threads.
- Install gauge (2).
- Install a new O-ring seal on cover (1). Use Tooling (B) to hold the O-ring seal in place.
- Install cover (1) with the oil filler and the oil level gauge and the bolts.
Note: Refer to Disassembly and Assembly, "General Information (Reference Material)" for more information. Refer to page 7 for torque values.
Caterpillar Information System:
3608 Engine Priority Valve - Install
3608 Engine Priority Valve - Assemble
3608 Engine Prelube Valve (Continuous) - Remove and Install
3608 Engine Prelubrication Oil Pump - Disassemble
2007/12/24 An Improved Exhaust Bellow is Used {1059}
3176C and 3196 Engines for Caterpillar Built Machines Engine Support (Front)
14L Motor Grader Machine Systems Circle - Remove
C175-16 and C175-20 Generator Set Engines Cylinder Head
3608 Engine Turbocharger - Install
3608 Engine Turbocharger - Assemble
3608 Engine Turbocharger - Disassemble
3608 Engine Turbocharger - Remove
14L Motor Grader Machine Systems Circle - Install
C12 Marine Engines Belts - Inspect/Adjust/Replace
3608 Engine Valve Cover Base - Remove and Install
3516C Generator Set Engine System Overview
3608 Engine Engine Oil Pump - Disassemble
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Component Location
3608 Engine Engine Oil Pump - Assemble
3608 Engine Engine Oil Pump - Install
3608 Engine Water Pump - Assemble
3516B Engine for 994F and 994H Wheel Loaders Electrical Connectors
3516C Generator Set Engine Configuration Parameters
C15 and C18 Petroleum Engines Fuel Transfer Pump