An Improved Exhaust Bellow is Used {1059}
- Engine:
- G3516C (S/N: DKR1-UP; RWA1-UP)
- Generator Set:
- G3516C (S/N: GZZ1-UP; GSB1-UP; TJB1-UP; TJC1-UP)
- G3516E (S/N: GHP1-UP)
- G3520C (S/N: GHE1-UP; GDB1-UP; GHC1-UP)
- G3520E (S/N: GHM1-UP; GHR1-UP)
- G3516E (S/N: SLY1-UP; GAS1-UP)
- G3520C (S/N: GZL1-UP; CWW1-UP; CWY1-UP; B9P1-UP; GZM1-UP; GZN1-UP)
- G3520E (S/N: GZH1-UP; HAL1-UP; GZG1-UP; SXY1-UP)
Description of Change: An improved exhaust bellow is used. The inner liner of the new bellows assembly has been reduced in diameter and shortened in length. The redesigned liner will decrease the potential for rubbing between the liner and the exhaust bellow during thermal expansion of the manifold.
Adaptable To: The new 301-3073 Bellows As replaces the 227-9027 Bellows As .
Note: Do not replace the 277-4843 Bellows As with the 301-3073 Bellows As .The 301-3073 Bellows As is adaptable to the Engines and Generator Sets that are listed above. Serial number effectivity is listed in Table 1.
Show/hide table
Serial Number Effectivity     | |
Engine     | Serial Number     |
G3516C     | S/N:DKR00104-UP     |
G3516C     | S/N:RWA00159-UP     |
G3516E     | S/N:GHP00154-UP     |
G3520C     | S/N:GHE00252-UP     |
G3520C     | S/N:GDB00038-UP     |
G3520C     | S/N:GHC00169-UP     |
G3520E     | S/N:GHM00153-UP     |
G3520E     | S/N:GHR00153-UP     |
Generator Set     | Serial Number     |
G3516C     | S/N:GZZ00255-UP     |
G3516C     | S/N:GSB00120-UP     |
G3516C     | S/N:TJB00001-UP     |
G3516C     | S/N:TJC00001-UP     |
G3516E     | S/N:SLY00001-UP     |
G3516E     | S/N:GAS00241-UP     |
G3520C     | S/N:GZL00146-UP     |
G3520C     | S/N:CWW00302-UP     |
G3520C     | S/N:CWY00222-UP     |
G3520C     | S/N:B9P00215-UP     |
G3520C     | S/N:GZM00184-UP     |
G3520C     | S/N:GZN00622-UP     |
G3520E     | S/N:GZH00134-UP     |
G3520E     | S/N:HAL00103-UP     |
G3520E     | S/N:GZG00112-UP     |
G3520E     | S/N:SXY00103-UP     |
Caterpillar Information System:
3176C and 3196 Engines for Caterpillar Built Machines Engine Support (Front)
14L Motor Grader Machine Systems Circle - Remove
C175-16 and C175-20 Generator Set Engines Cylinder Head
3608 Engine Turbocharger - Install
3608 Engine Turbocharger - Assemble
3608 Engine Turbocharger - Disassemble
3608 Engine Turbocharger - Remove
Procedure to Update a Standard TH48-E80 Oil/Gas Transmission to a Warm-Up Mode TH48-E80 Oil/Gas Transmission{1408, 3083, 3160, 3168, 4800, 7610} Procedure to Update a Standard TH48-E80 Oil/Gas Transmission to a Warm-Up Mode TH48-E80 Oil/Gas Transmission{1408, 3083, 3160, 3168, 4800, 7610}
3608 Engine Exhaust Manifold - Remove and Install
C15 and C18 Petrolem Generator Set Engines Sensor Signal (Analog, Passive) - Test
3608 Engine Air Inlet Shutoff - Remove and Install
3608 Engine Fuel Transfer Pump - Install
3608 Engine Prelubrication Oil Pump - Disassemble
3608 Engine Prelube Valve (Continuous) - Remove and Install
3608 Engine Priority Valve - Assemble
3608 Engine Priority Valve - Install
3608 Engine Engine Oil Filler and Oil Level Gauge - Remove and Install
14L Motor Grader Machine Systems Circle - Install
C12 Marine Engines Belts - Inspect/Adjust/Replace
3608 Engine Valve Cover Base - Remove and Install
3516C Generator Set Engine System Overview
3608 Engine Engine Oil Pump - Disassemble
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Component Location
3608 Engine Engine Oil Pump - Assemble