Water Pump - Remove and Install
Removal Procedure
Show/hide table
 |
Personal injury can result from hot coolant, steam and alkali. At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns. Remove filler cap slowly to relieve pressure only when engine is stopped and radiator cap is cool enough to touch with your bare hand. Cooling System Conditioner contains alkali. Avoid contact with skin and eyes. |
 |
- Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
- Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace" to remove and install the belt.
- Disconnect hoses (1), (2), and (4). Remove plate (3) .
Show/hide table
 | |
| Illustration 1 | g03740839 |
- Disconnect hose (7). Remove bolts (5) and water pump (6) .
Show/hide table
 | |
| Illustration 2 | g03740844 |
Installation Procedure
- Install water pump (6) in the reverse order of removal.
Caterpillar Information System:
335F CR Excavator C7.1 Engine Supplement Nitrogen Oxide Sensor - Remove and Install - Outlet
C27 and C32 Engines for Caterpillar Built Machines Oil Level - Test
Installation of the Winch on the D3K2, D4K2, and D5K2 Track-Type Tractors {5163} Installation of the Winch on the D3K2, D4K2, and D5K2 Track-Type Tractors {5163}
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Maintenance Interval Schedule
Specifications and Salvage for Well Stimulation Fluid End {0374, 0599, 0679, 5070, 7000} Specifications and Salvage for Well Stimulation Fluid End {0374, 0599, 0679, 5070, 7000}
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Assemble - Standard
D6R2 Track-Type Tractor Engine Supplement Water Temperature Regulator - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Disassemble - Standard
D6R2 Track-Type Tractor Engine Supplement Engine Trunnion - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Assemble - Locking
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Disassemble - Locking
D6R2 Track-Type Tractor Engine Supplement Engine Front Support - Remove and Install
335F CR Excavator C7.1 Engine Supplement Nitrogen Oxide Sensor - Remove and Install - Inlet
335F CR Excavator C7.1 Engine Supplement Fan - Remove and Install
335F CR Excavator C7.1 Engine Supplement Fan Drive - Remove and Install
335F CR Excavator C7.1 Engine Supplement Water Pump - Remove and Install
D7E Track-Type Tractor Engine Supplement Water Pump - Remove and Install
D6R2 Track-Type Tractor Engine Supplement Engine Oil Pan - Remove and Install
Installation of 5SU (S/N: TR5) Bulldozer on a D5R Track-Type Tractor {6050, 6060, 6078} Installation of 5SU (S/N: TR5) Bulldozer on a D5R Track-Type Tractor {6050, 6060, 6078}
930K Wheel Loader Power Train Steering Frame Lock - Separate and Connect
D6R2 Track-Type Tractor Engine Supplement Engine Oil Pump - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train System Pressure - Release
D7E Track-Type Tractor Resistive Temperature Device - Test
2014/11/03 An Improved Version of Cat Production Measurement (CPM) for M-Series Medium Wheel Loaders Is Now Available {4800, 4808, 5701, 7490, 7494, 7601, 7603, 7610, 7620}