Engine Trunnion - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 6V-3160     | Double Acting Cylinder     | 1     |
350-7768 | Electric Hydraulic Pump Gp (115V)     | 1     | |
350-7769 | Electric Hydraulic Pump Gp (230V)     | 1     |
Start By:
- Remove the vibration damper and the pulley.
- Remove front mounting bolts (1) .
Show/hide table
Illustration 1 | g01203946 |
- Remove bolts (2) and bracket (3) .
Show/hide table
Illustration 2 | g00855374 |
- Install Tooling (A) and suitable blocking for support.
Show/hide table
Illustration 3 | g00855376 |
- Lift engine mount (4) from mount (5) approximately 12.7 mm (0.50 inch) from mount (5) .
Show/hide table
Illustration 4 | g00855378 |
- Place blocks (6) under the front of oil pan (7). Lower the engine on blocks (6) and remove Tooling (A). Remove bolts (10). Remove the crankshaft pulley. Blocks (6) are setting in bottom guard (8). Remove bolts (9). Remove engine mount (4) .
Show/hide table
Illustration 5 | g00855379 |
- Remove bolts (11) and trunnion (12) .
Show/hide table
Illustration 6 | g00855380 |
Installation Procedure
- Install trunnion (12) in the reverse order of removal.
- Tighten front mounting bolts (1) to a torque of 270 ± 40 N·m (200 ± 30 lb ft).
Caterpillar Information System:
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Assemble - Locking
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Disassemble - Locking
D6R2 Track-Type Tractor Engine Supplement Engine Front Support - Remove and Install
834K Wheel Dozer Maintenance Interval Schedule
D6R2 Track-Type Tractor Engine Supplement Valve Cover - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Remove and Install - Standard
D6R2 Track-Type Tractor Engine Supplement Turbocharger - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Remove and Install - Locking
D7E Track-Type Tractor Systems Pump Control Valve (Implement)
D6R2 Track-Type Tractor Engine Supplement Secondary Fuel Filter and Base - Remove and Install
D7E Track-Type Tractor Systems Sweep Group
D7E Track-Type Tractor Systems Final Drive Mounting
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Disassemble - Standard
D6R2 Track-Type Tractor Engine Supplement Water Temperature Regulator - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Assemble - Standard
Specifications and Salvage for Well Stimulation Fluid End {0374, 0599, 0679, 5070, 7000} Specifications and Salvage for Well Stimulation Fluid End {0374, 0599, 0679, 5070, 7000}
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Maintenance Interval Schedule
Installation of the Winch on the D3K2, D4K2, and D5K2 Track-Type Tractors {5163} Installation of the Winch on the D3K2, D4K2, and D5K2 Track-Type Tractors {5163}
C27 and C32 Engines for Caterpillar Built Machines Oil Level - Test
335F CR Excavator C7.1 Engine Supplement Nitrogen Oxide Sensor - Remove and Install - Outlet
D6R2 Track-Type Tractor Engine Supplement Water Pump - Remove and Install
335F CR Excavator C7.1 Engine Supplement Nitrogen Oxide Sensor - Remove and Install - Inlet
335F CR Excavator C7.1 Engine Supplement Fan - Remove and Install
335F CR Excavator C7.1 Engine Supplement Fan Drive - Remove and Install