926M, 930M and 938M Wheel Loaders Power Train Caterpillar


Differential and Pinion - Assemble - Standard

Usage:

930M HEY

Assembly Procedure

Differential (Standard)



    Illustration 1g02867177

  1. Install thrust washer (11) in case assembly (12).


    Illustration 2g02867176

  2. Install bevel gear (10).


    Illustration 3g02867156

  3. Install sleeve bearing (7), bevel pinion (8), and thrust washer (9) on spider (6).


    Illustration 4g02867137

  4. Install spider and gear assembly (5).


    Illustration 5g02867117

  5. Install bevel gear (3) and thrust washer (4).


    Illustration 6g02867096

  6. Position the upper case half onto the differential assembly. Install ring gear (2) and install new bolts (1). Tighten bolts (1) to the correct torque specified in Table 1

    Table 1
    Torque Chart for bolts (1) 
    Machine  Serial Number  Initial Torque  Torque Turn 
    926  (S/N: LTE1-UP)  120 ± 20 N·m (89 ± 15 lb ft) 
    930  (S/N: TNY1-UP) (S/N: KTG1-UP) (S/N: HEY1-UP)  95 ± 10 N·m (70 ± 7 lb ft)  180° ± 5° 

End By:

  1. Install the differential.

Caterpillar Information System:

D6R2 Track-Type Tractor Engine Supplement Water Temperature Regulator - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Disassemble - Standard
D6R2 Track-Type Tractor Engine Supplement Engine Trunnion - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Assemble - Locking
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Disassemble - Locking
D6R2 Track-Type Tractor Engine Supplement Engine Front Support - Remove and Install
834K Wheel Dozer Maintenance Interval Schedule
D6R2 Track-Type Tractor Engine Supplement Valve Cover - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Remove and Install - Standard
D6R2 Track-Type Tractor Engine Supplement Turbocharger - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Remove and Install - Locking
D7E Track-Type Tractor Systems Pump Control Valve (Implement)
Specifications and Salvage for Well Stimulation Fluid End {0374, 0599, 0679, 5070, 7000} Specifications and Salvage for Well Stimulation Fluid End {0374, 0599, 0679, 5070, 7000}
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Maintenance Interval Schedule
Installation of the Winch on the D3K2, D4K2, and D5K2 Track-Type Tractors {5163} Installation of the Winch on the D3K2, D4K2, and D5K2 Track-Type Tractors {5163}
C27 and C32 Engines for Caterpillar Built Machines Oil Level - Test
335F CR Excavator C7.1 Engine Supplement Nitrogen Oxide Sensor - Remove and Install - Outlet
D6R2 Track-Type Tractor Engine Supplement Water Pump - Remove and Install
335F CR Excavator C7.1 Engine Supplement Nitrogen Oxide Sensor - Remove and Install - Inlet
335F CR Excavator C7.1 Engine Supplement Fan - Remove and Install
335F CR Excavator C7.1 Engine Supplement Fan Drive - Remove and Install
335F CR Excavator C7.1 Engine Supplement Water Pump - Remove and Install
D7E Track-Type Tractor Engine Supplement Water Pump - Remove and Install
D6R2 Track-Type Tractor Engine Supplement Engine Oil Pan - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.