Differential and Pinion - Disassemble - Standard
Start By:
- Remove the differential
- Mark case assembly for assembly purposes.
- Remove bolts (1) and ring gear (2). Lift the upper case half from the differential assembly.
Show/hide table
Illustration 2 g02867117 - Remove thrust washer (4) and bevel gear (3).
Show/hide table
Illustration 3 g02867137 - Remove spider and gear assembly (5).
Show/hide table
Illustration 4 g02867156 - Remove thrust washer (9), bevel pinion (8), and sleeve bearing (7) from spider (6).
- Repeat for the remainder of the spider and gear assembly.
Show/hide table
Illustration 5 g02867176 - Remove bevel gear (10).
Show/hide table
Illustration 6 g02867177 - Remove thrust washer (11) from case assembly (12).
Show/hide table
Illustration 1 | g02867096 |
Caterpillar Information System:
D6R2 Track-Type Tractor Engine Supplement Engine Trunnion - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Assemble - Locking
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Disassemble - Locking
D6R2 Track-Type Tractor Engine Supplement Engine Front Support - Remove and Install
834K Wheel Dozer Maintenance Interval Schedule
D6R2 Track-Type Tractor Engine Supplement Valve Cover - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Remove and Install - Standard
D6R2 Track-Type Tractor Engine Supplement Turbocharger - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Remove and Install - Locking
D7E Track-Type Tractor Systems Pump Control Valve (Implement)
D6R2 Track-Type Tractor Engine Supplement Secondary Fuel Filter and Base - Remove and Install
D7E Track-Type Tractor Systems Sweep Group
D6R2 Track-Type Tractor Engine Supplement Water Temperature Regulator - Remove and Install
926M, 930M and 938M Wheel Loaders Power Train Differential and Pinion - Assemble - Standard
Specifications and Salvage for Well Stimulation Fluid End {0374, 0599, 0679, 5070, 7000} Specifications and Salvage for Well Stimulation Fluid End {0374, 0599, 0679, 5070, 7000}
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Maintenance Interval Schedule
Installation of the Winch on the D3K2, D4K2, and D5K2 Track-Type Tractors {5163} Installation of the Winch on the D3K2, D4K2, and D5K2 Track-Type Tractors {5163}
C27 and C32 Engines for Caterpillar Built Machines Oil Level - Test
335F CR Excavator C7.1 Engine Supplement Nitrogen Oxide Sensor - Remove and Install - Outlet
D6R2 Track-Type Tractor Engine Supplement Water Pump - Remove and Install
335F CR Excavator C7.1 Engine Supplement Nitrogen Oxide Sensor - Remove and Install - Inlet
335F CR Excavator C7.1 Engine Supplement Fan - Remove and Install
335F CR Excavator C7.1 Engine Supplement Fan Drive - Remove and Install
335F CR Excavator C7.1 Engine Supplement Water Pump - Remove and Install