335F CR Excavator C7.1 Engine Supplement Caterpillar

Removal Procedure

1. Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
   Show/hide table

   Illustration 1	g03737654

2. Turn disconnect switch (1) to the OFF position.
   Show/hide table

   Illustration 2	g03737655

3. Open hood (2).
   Show/hide table

   Illustration 3	g03741381

4. Disconnect hoses (3).
   Show/hide table

   Illustration 4	g03741382

5. Disconnect hose assembly (5). Disconnect hoses (4) and (6).
   Show/hide table

   Illustration 5	g03741384

6. Remove bolts (8), bolts (9), bolt (11), water pump (10), and gasket (7).

Installation Procedure

1. Install water pump (10) in the reverse order of removal.
   Show/hide table

   Illustration 6	g01985813

   1. Tighten bolts (8), bolts (9), and bolt (11) in the sequence that is shown in Illustration 6 to a torque of 22 N·m (195 lb in).