Air Inlet Elbow
Show/hide table
Illustration 1 | g01061375 |
(1) Air inlet elbow
Apply 1U-8846 Liquid Gasket to the face of the elbow and spread the sealant uniformly. The elbow must be assembled and the elbow must be tightened within ten minutes.
Caterpillar Information System:
C-15 Petroleum Engine Fuel Filter Base - Install
C-15 Petroleum Engine Fuel Filter Base - Remove
C-15 Petroleum Engine Fuel Priming Pump - Remove and Install
C9 On-highway Engine Camshaft
C-15 Petroleum Engine Aftercooler - Remove
C-15 Petroleum Engine Aftercooler - Install
3126B Petroleum Engine Engine Oil and Filter - Change
G3520C and G3520E Engines Water Pump
C7 On-highway Engine Air Compressor
3126B Petroleum Engine Refill Capacities and Recommendations
C-15 Petroleum Engine Auxiliary Water Pump - Assemble
C-15 Petroleum Engine Auxiliary Water Pump - Disassemble
3126B Petroleum Engine Reference Material
C13, C15, and C18 Generator Set Engines Basic Engine
C13 Engines Engine Oil Level - Check
C-15 Petroleum Engine Air Inlet and Exhaust System
2004/03/29 New High Temperature Seals are Available {7555}
C-15 Petroleum Engine Engine Oil Filter Base - Install
C-15 Petroleum Engine Engine Oil Filter Base - Assemble
C-15 Petroleum Engine Engine Oil Filter Base - Disassemble
C-15 Petroleum Engine Engine Oil Filter Base - Remove
3406E, C-10 and C-12 On-highway Engines 0026-05 Auxiliary Output #01 current low (69)
3406E, C-10 and C-12 On-highway Engines 0026-06 Auxiliary Output #01 current high (69)
3406E, C-10 and C-12 On-highway Engines 0040-05 Auxiliary Output #02 current low (66)