Air Compressor
Show/hide table
Illustration 1 | g01156944 |
Show/hide table
Illustration 2 | g01156946 |
View A-A |
(1) Air compressor
(2) Nut
Use the following procedure to mount the air compressor.
- Install two bolts (A) and tighten the bolts to the standard torque.
- Install the four bolts (B) finger tight.
- Tighten four bolts (B) to the standard torque.
Caterpillar Information System:
3126B Petroleum Engine Refill Capacities and Recommendations
C-15 Petroleum Engine Auxiliary Water Pump - Assemble
C-15 Petroleum Engine Auxiliary Water Pump - Disassemble
3126B Petroleum Engine Diagnostic Flash Code Retrieval
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Accessory Drive (Upper Left Hand)
SCJ and 8SC Series Alternators Stator - Test
SCJ and 8SC Series Alternators Field Winding - Test
SCJ and 8SC Series Alternators Capacitor - Test
G3520C and G3520E Engines Temperature Sensor - Thermocouple
3126B Petroleum Engine Throttle Position Sensor Circuit - Test
C-10 and C-15 Petroleum Engines Injector Solenoid Circuit - Test
G3408C and G3412C Engines Engine Oil Level - Check
G3520C and G3520E Engines Water Pump
3126B Petroleum Engine Engine Oil and Filter - Change
C-15 Petroleum Engine Aftercooler - Install
C-15 Petroleum Engine Aftercooler - Remove
C9 On-highway Engine Camshaft
C-15 Petroleum Engine Fuel Priming Pump - Remove and Install
C-15 Petroleum Engine Fuel Filter Base - Remove
C-15 Petroleum Engine Fuel Filter Base - Install
C9 Urban Transit Bus Engine Air Inlet Elbow
3126B Petroleum Engine Reference Material
C13, C15, and C18 Generator Set Engines Basic Engine
C13 Engines Engine Oil Level - Check