C-15 Petroleum Engine Caterpillar


Fuel Filter Base - Remove

Usage:

C-15 Z2C

Removal Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     185-3630     Strap Wrench     1    


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.

Dispose of all fluids according to local regulations and mandates.



NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


  1. Turn the fuel supply to the "OFF" position.



    Illustration 1g01061332

  1. Disconnect hose assembly (2) from fuel filter base (6) .

  1. Disconnect hose assembly (5) from fuel filter base (6) .

  1. Disconnect tube assembly (1) from fuel filter base (6) .

  1. Disconnect the harness assembly from fuel pressure sensor (4). Remove the fuel pressure sensor from the fuel filter base.

  1. Use Tooling (A) to remove fuel filter (7) from fuel filter base (6) .

  1. Remove bolts (3) and remove the fuel filter base.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.