Engine Oil Filter Base - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install O-ring seals (17) on adapter (18). Position the adapter on the oil filter base assembly (16). Install bolts (20) .
Show/hide table
Illustration 1 | g01061717 |
- Install O-ring seals (10), (12), and (14) on oil filter base assembly (16) .
- Position the oil filter base assembly on the engine oil cooler and the cylinder block and install bolts (15) .
- Install bolts (11). Install bolts (13) .
- Install the O-ring seals on hose assembly (8) and hose assembly (9) .
- Position hose assembly (8) and hose assembly (9) on adapter (18) and install bolts (19) .
- Position oil filter base (6) on the flywheel housing and install bolts (1) .
Show/hide table
Illustration 2 | g01061623 |
- Install gasket (3) on the oil filter base. Position oil filter adapter (4) on oil filter base (6) and install bolts (2).
- Install the O-ring seals on hose assembly (8) and hose assembly (9) .
- Position hose assembly (8) and hose assembly (9) on oil filter adapter (4) and install bolts (5) .
- Install engine oil filter (7). Follow the directions on the engine oil filter for the correct installation procedure. Do not overtighten the engine oil filter.
- Fill the lubrication system with engine oil. Refer to Operation and Maintenance Manual, "Refill Capacities" for the lubrication system capacity of the engine.
Caterpillar Information System:
2004/03/29 New High Temperature Seals are Available {7555}
C-15 Petroleum Engine Air Inlet and Exhaust System
C13 Engines Engine Oil Level - Check
C13, C15, and C18 Generator Set Engines Basic Engine
3126B Petroleum Engine Reference Material
C9 Urban Transit Bus Engine Air Inlet Elbow
C-15 Petroleum Engine Fuel Filter Base - Install
C-15 Petroleum Engine Fuel Filter Base - Remove
C-15 Petroleum Engine Fuel Priming Pump - Remove and Install
C9 On-highway Engine Camshaft
C-15 Petroleum Engine Aftercooler - Remove
C-15 Petroleum Engine Aftercooler - Install
C-15 Petroleum Engine Engine Oil Filter Base - Assemble
C-15 Petroleum Engine Engine Oil Filter Base - Disassemble
C-15 Petroleum Engine Engine Oil Filter Base - Remove
3406E, C-10 and C-12 On-highway Engines 0026-05 Auxiliary Output #01 current low (69)
3406E, C-10 and C-12 On-highway Engines 0026-06 Auxiliary Output #01 current high (69)
3406E, C-10 and C-12 On-highway Engines 0040-05 Auxiliary Output #02 current low (66)
3406E, C-10 and C-12 On-highway Engines 0040-06 Auxiliary Output #02 current high (66)
3406E, C-10 and C-12 On-highway Engines 0051-05 Auxiliary Output #03 current low (67)
3406E, C-10 and C-12 On-highway Engines 0051-06 Auxiliary Output #03 Current High (67)
3406E, C-10 and C-12 On-highway Engines 0071-01 Idle Shutdown (47)
C13, C15, and C18 Generator Set Engines E096 High Fuel Pressure
C13, C15, and C18 Generator Set Engines E198 Low Fuel Pressure