Fuel Filter Base - Install
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position fuel filter base (6) on the cylinder block. Install bolts (3) .
Show/hide table
 | |
| Illustration 1 | g01061332 |
- Install fuel filter (7) on the fuel filter base. Follow the directions on the fuel filter for the correct installation procedure. Do not overtighten the fuel filter.
- Connect hose assembly (2) to the fuel filter base.
- Connect hose assembly (5) to the fuel filter base.
- Connect tube assembly (1) to the fuel filter base.
- Install fuel pressure sensor (4). Connect the harness assembly to the fuel pressure sensor.
- Turn the fuel supply to the "ON" position.
- Remove the air from the system. Refer to Testing and Adjusting, "Fuel System - Prime".
Caterpillar Information System:
C-15 Petroleum Engine Fuel Filter Base - Remove
C-15 Petroleum Engine Fuel Priming Pump - Remove and Install
C9 On-highway Engine Camshaft
C-15 Petroleum Engine Aftercooler - Remove
C-15 Petroleum Engine Aftercooler - Install
3126B Petroleum Engine Engine Oil and Filter - Change
G3520C and G3520E Engines Water Pump
C7 On-highway Engine Air Compressor
3126B Petroleum Engine Refill Capacities and Recommendations
C-15 Petroleum Engine Auxiliary Water Pump - Assemble
C-15 Petroleum Engine Auxiliary Water Pump - Disassemble
3126B Petroleum Engine Diagnostic Flash Code Retrieval
C9 Urban Transit Bus Engine Air Inlet Elbow
3126B Petroleum Engine Reference Material
C13, C15, and C18 Generator Set Engines Basic Engine
C13 Engines Engine Oil Level - Check
C-15 Petroleum Engine Air Inlet and Exhaust System
2004/03/29 New High Temperature Seals are Available {7555}
C-15 Petroleum Engine Engine Oil Filter Base - Install
C-15 Petroleum Engine Engine Oil Filter Base - Assemble
C-15 Petroleum Engine Engine Oil Filter Base - Disassemble
C-15 Petroleum Engine Engine Oil Filter Base - Remove
3406E, C-10 and C-12 On-highway Engines 0026-05 Auxiliary Output #01 current low (69)
3406E, C-10 and C-12 On-highway Engines 0026-06 Auxiliary Output #01 current high (69)