Engine Oil Filter Base - Assemble
Assembly Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 155-0695     | Thread Lock Compound     | -     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Lubricate plungers (4) and springs (5) with clean engine oil. Install the plungers and the springs in oil filter base assembly (3) .
Show/hide table
Illustration 1 | g01063765 |
Show/hide table
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
- Position gaskets (6) and covers (8) on the oil filter base assembly. Install bolts (7) .
- Install O-ring seal (2) on plug (1). Install the plug in oil filter base assembly (3) .
- If necessary, install taperlock stud (9) to oil filter base assembly (3). Tighten the taperlock stud to a torque of 81 ± 14 N·m (60 ± 10 lb ft).
Note: Apply Tooling (A) to the first 7.5 ± 1.5 mm (0.30 ± 0.06 inch) of threads at the base end of the taperlock stud.
End By: Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Install".
Caterpillar Information System:
C-15 Petroleum Engine Engine Oil Filter Base - Install
2004/03/29 New High Temperature Seals are Available {7555}
C-15 Petroleum Engine Air Inlet and Exhaust System
C13 Engines Engine Oil Level - Check
C13, C15, and C18 Generator Set Engines Basic Engine
3126B Petroleum Engine Reference Material
C9 Urban Transit Bus Engine Air Inlet Elbow
C-15 Petroleum Engine Fuel Filter Base - Install
C-15 Petroleum Engine Fuel Filter Base - Remove
C-15 Petroleum Engine Fuel Priming Pump - Remove and Install
C9 On-highway Engine Camshaft
C-15 Petroleum Engine Aftercooler - Remove
C-15 Petroleum Engine Engine Oil Filter Base - Disassemble
C-15 Petroleum Engine Engine Oil Filter Base - Remove
3406E, C-10 and C-12 On-highway Engines 0026-05 Auxiliary Output #01 current low (69)
3406E, C-10 and C-12 On-highway Engines 0026-06 Auxiliary Output #01 current high (69)
3406E, C-10 and C-12 On-highway Engines 0040-05 Auxiliary Output #02 current low (66)
3406E, C-10 and C-12 On-highway Engines 0040-06 Auxiliary Output #02 current high (66)
3406E, C-10 and C-12 On-highway Engines 0051-05 Auxiliary Output #03 current low (67)
3406E, C-10 and C-12 On-highway Engines 0051-06 Auxiliary Output #03 Current High (67)
3406E, C-10 and C-12 On-highway Engines 0071-01 Idle Shutdown (47)
C13, C15, and C18 Generator Set Engines E096 High Fuel Pressure
C13, C15, and C18 Generator Set Engines E198 Low Fuel Pressure
C13, C15, and C18 Generator Set Engines E361 High Engine Coolant Temperature