0040-06 Auxiliary Output #02 current high (66)
产生此代码的情况:
ECM 检测到下述情况时：
- 辅助输出 02 中存在电流偏高情况（短路）。
系统响应:
当前启用的电磁阀将留在 ON 位置，直到检测到空档。 随后进行手动操作，直到系统断电。 手动操作定义为全部两个电磁阀均处于 OFF 状态。
ECM 停用 Eaton Top 2 模式。
测试步骤 1. 进行以下的诊断步骤: Eaton Top 2 变速箱电路 - 测试
结果:
- 正常 - 停止
Caterpillar Information System:
3406E, C-10 and C-12 On-highway Engines 0040-05 Auxiliary Output #02 current low (66)
3406E, C-10 and C-12 On-highway Engines 0026-06 Auxiliary Output #01 current high (69)
3406E, C-10 and C-12 On-highway Engines 0026-05 Auxiliary Output #01 current low (69)
C-15 Petroleum Engine Engine Oil Filter Base - Remove
C-15 Petroleum Engine Engine Oil Filter Base - Disassemble
C-15 Petroleum Engine Engine Oil Filter Base - Assemble
C-15 Petroleum Engine Engine Oil Filter Base - Install
2004/03/29 New High Temperature Seals are Available {7555}
C-15 Petroleum Engine Air Inlet and Exhaust System
C13 Engines Engine Oil Level - Check
C13, C15, and C18 Generator Set Engines Basic Engine
3126B Petroleum Engine Reference Material
3406E, C-10 and C-12 On-highway Engines 0051-05 Auxiliary Output #03 current low (67)
3406E, C-10 and C-12 On-highway Engines 0051-06 Auxiliary Output #03 Current High (67)
3406E, C-10 and C-12 On-highway Engines 0071-01 Idle Shutdown (47)
C13, C15, and C18 Generator Set Engines E096 High Fuel Pressure
C13, C15, and C18 Generator Set Engines E198 Low Fuel Pressure
C13, C15, and C18 Generator Set Engines E361 High Engine Coolant Temperature
C13, C15, and C18 Generator Set Engines E362 Engine Overspeed
3412E Petroleum Engine Model View Illustrations
C11 and C13 Petroleum Engines Fuel System - Prime
3126B Petroleum Engine Model View Illustrations
3406E and 3456 Generator Set Engines System Overview
3406E, C-10 and C-12 On-highway Engines 0071-14 PTO Shutdown (47)